Wago

WAGO 859-740 Pack of 10

(No reviews yet) Write a Review
SKU:
859-740
MPN:
859-740
Condition:
New
circuit type:
2-wire connection
color:
Gray
connection technology:
CAGE CLAMP«
country of origin sales organisation germany:
CN
depth from upper edge of din rail:
56 mm / 2.205 inch
dielectric strength control load circuit ac 1 min:
2.5 kVrms
drop out time t10 90:
16 s
fine stranded conductor:
0.2 ƒƒ‡ª 2.5 mm / 24 ƒƒ‡ª 14 AWG
fine stranded conductor with ferrule push in termination:
0.2 ƒƒ‡ª 1.5 mm / 24 ƒƒ‡ª 14 AWG
fine stranded conductor with insulated ferrule:
0.2 ƒƒ‡ª 1.5 mm / 24 ƒƒ‡ª 14 AWG
fire load:
0.418 MJ
height:
91 mm / 3.583 inch
input voltage range high level:
DC 16 ƒƒ‡ª 30 V
input voltage range low level:
DC 0 ƒƒ‡ª 6.5 V
insulation type between adjacent devices of the the same type:
Reinforced insulation (safe isolation)
insulation type control load circuit:
Basic insulation
insulation type to any type of adjacent devices:
Basic insulation
leakage current at rated voltage:
ƒƒ«ƒƒ± 10 A
limiting continuous current:
0.208333333333333
mounting position:
Horizontal (standing/lying): vertical
mounting type:
DIN-35 rail
nominal input current at un:
8 mA
nominal input voltage un:
DC 24 V
nominal output voltage:
DC 24 V
note:
Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks.
note on protection type:
When mated or with end plate 859-525
operating altitude max:
2000 m
output voltage range:
DC 3 ƒƒ‡ª 30 V
overvoltage category:
II
packaging type:
Box
peak output current:
25 A
pollution degree:
2
processing temperature:
-25 ƒƒ‡ª +50 C
protection type:
IP20
rated voltage:
300 V
relative humidity:
5 ƒƒ‡ª 95 % (non-condensing)
rise time t10 90:
16 s
solid conductor:
0.2 ƒƒ‡ª 2.5 mm / 24 ƒƒ‡ª 14 AWG
standards specifications:
EN 61010-2-201 || EN 61000-6-2 || EN 61000-6-3 || UL 508
status indicator:
Yellow LED
strip length:
5 ƒƒ‡ª 6 mm / 0.2 ƒƒ‡ª 0.24 inch
surrounding air operating temperature for ul:
-40 ƒƒ‡ª 40 C
surrounding air temperature operation at un:
-40 ƒƒ‡ª 70 C
surrounding air temperature storage:
-25 ƒƒ‡ª 70 C
switching frequency:
ƒƒ«ƒƒ± 2.5 kHz
turn off time:
ƒƒ«ƒƒ± 100 s
turn on time:
ƒƒ«ƒƒ± 30 s
voltage drop at output max:
ƒƒ«ƒƒ± DC 0.4 V
weight:
18.468 g
width:
6 mm / 0.236 inch
  • Wago 859-740 Pack of 10
  • Wago 859-740 Pack of 10
  • Wago 859-740 Pack of 10
  • Wago 859-740 Pack of 10
$545.40

Description

Optocoupler module; Nominal input voltage: 24 VDC; Output voltage range: 3 … 30 VDC; Limiting continuous current: 5 A; 2-wire connection; Module width: 6 mm; gray.

The WAGO 859 series solid-state relay (SSR) is a fixed-type, single-pole, single-phase relay with a yellow LED indicator, designed for 2-wire connections. It operates with a control voltage range of 16-30Vdc (24Vdc nominal) and provides an output rated voltage of 3Vdc-30Vdc (24Vdc nominal) with a continuous rated current of 5.5A. The relay features CAGE CLAMP connections and is suitable for DIN-35 rail mounting with a width of 6mm, equivalent to model 859740.

View AllClose