Optocoupler module; Nominal input voltage: 24 VDC; Output voltage range: 20
28.8 VDC; Limiting continuous current: 0.1 A; 3-wire connection/high-side switching; Frequency: 100 kHz; Red status indicator; Module width: 6 mm.
The WAGO 859 series solid-state relay (SSR) is a fixed-type, single-pole, single-phase relay with a red LED indicator, designed for high-side switching with a 3-wire connection. It operates with a control voltage of 20-30Vdc (24Vdc nominal) and has an output rated voltage of 20-28.8Vdc (24Vdc nominal) with a continuous rated current of 0.1A. The relay features CAGE CLAMP connections and is suitable for DIN-35 rail mounting with a width of 6mm, equivalent to model 859759.
- circuit type:
- 3-wire connection || High-side switching
- connection technology:
- CAGE CLAMP
- country of origin sales organisation germany:
- DE
- depth from upper edge of din rail:
- 56 mm / 2.205 inch
- dielectric strength control load circuit ac 1 min:
- 2.5 kVrms
- fine stranded conductor:
- 0.08 2.5 mm / 28 14 AWG
- fire load:
- 0.313 MJ
- height:
- 91 mm / 3.583 inch
- input voltage range high level:
- DC 20 30 V
- input voltage range low level:
- DC 0 5 V
- insulation type adjacent devices:
- Reinforced insulation (safe isolation)
- insulation type control load circuit:
- Basic insulation
- leakage current at rated voltage:
- ¤ 10 A
- limiting continuous current:
- 0.1 A
- mounting type:
- DIN-35 rail
- nominal input current at un:
- 9 mA
- nominal input voltage un:
- DC 24 V
- nominal output voltage:
- DC 24 V
- note:
- Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks.
- operating altitude max:
- 2000 m
- output closed circuit current without load max:
- 7 mA
- output voltage range:
- DC 20 28.8 V
- overvoltage category:
- II
- packaging type:
- Box
- peak output current:
- 0.8 A
- pollution degree:
- 2
- processing temperature:
- -25 +50 C
- rated voltage:
- 300 V
- relative humidity:
- 5 95 % (no condensation permissible)
- solid conductor:
- 0.08 2.5 mm / 28 14 AWG
- standards specifications:
- EN 61010-2-201 || EN 61000-6-2 || EN 61000-6-3 || EN 61373
- status indicator:
- Red LED
- strip length:
- 5 6 mm / 0.2 0.24 inch
- surrounding air temperature operation at un:
- -25 55 C
- surrounding air temperature storage:
- -40 70 C
- switching frequency:
- ¤ 100 kHz
- turn off time:
- ¤ 2 s
- turn on time:
- ¤ 0.5 s
- voltage drop at output max:
- ¤ DC 1.2 V
- weight:
- 19.099 g
- width:
- 6 mm / 0.236 inch
