Wago

WAGO 787-2742

SKU:

787-2742

UPC:

MPN:

787-2742

Condition:

New

conformity marking:

CE: EAC

connection technology:

Push-in CAGE CLAMP

connection technology 2:

Push-in CAGE CLAMP

connection type 1:

Input/output

connection type 2:

Signaling

control deviation:

¤ 1 %

country of origin sales organisation germany:

CN

default setting:

DC 24 V

depth from upper edge of din rail:

170 mm / 6.693 inch

derating:

-2 %/K (> 45 C)

discharge current:

¤ 3.5 mA

efficiency typ:

0.92

fine stranded conductor:

0.5 6 mm / 20 10 AWG

fine stranded conductor 2:

0.2 1.5 mm / 24 14 AWG

fire load:

0.065 MJ

height:

130 mm / 5.118 inch

input current ii:

¤ 3 x 1.2 A (400 VAC)

input voltage range:

(2 / 3) x AC 325 575 V: DC 560 700 V

inrush current:

¤ 30 A (400 VAC)

internal fuse:

3 x T 3.15 A / 500 VAC

isolation voltage pri gnd:

DC 2.2 kV

isolation voltage pri sec:

DC 4.242 kV

isolation voltage sec gnd:

DC 0.7 kV

isolation voltage sec signal:

DC 0.7 kV

mains failure hold up time:

10 ms (3 x 400 VAC)

mounting type:

DIN-35 rail

mtbf:

> 1,800,000 h (per IEC 61709)

nominal input voltage ui nom:

(2 / 3) x AC 400 480 V

nominal mains frequency range:

47 63 Hz: 0 Hz

nominal output current io nom:

20 A (24 VDC)

nominal output power:

480 W

nominal output voltage uo nom:

DC 24 V (SELV)

open circuit proof:

Yes

operation status indicator:

Green LED (Uo) || Red LED (overload)

output voltage range:

DC 22 28 V (adjustable)

overload behavior:

Constant power (in overload range: 1.05 1.4 x Io nom): Shutdown and automatic restart in the event of a short circuit

overvoltage category:

II

packaging type:

Box

parallel operation:

Yes

phases:

2 || 3

pollution degree:

2

power factor:

0.7 (400 VAC)

power factor correction pfc:

Passive

power loss pl:

¤ 2.15 W (400 VAC: No load): ¤ 42.5 W (400 VAC: Nominal load)

protection class:

I

protection type:

IP20 (per EN 60529)

recommended backup fusing:

3 x circuit breaker 10 A: Tripping characteristic: B or C

relative humidity:

10 95 % (no condensation permissible)

required backup fusing:

An external DC fuse is required for the DC input voltage.

residual ripple:

¤ 150 mV (Peak-to-peak)

resistance to reverse feed:

¤ DC 30 V

resistance to shock and vibration:

Shock: 15g (per EN 60068-2-27) || Vibration: 1g (per EN 60068-2-6)

series operation:

Max. 2 devices

short circuit protected:

Yes

signaling:

1 x LED DC OK (green) || 1 x Overload LED (red) || 1 x DC OK signal output (PhotoMOS as make contact: can be loaded with max. 31.2 V / 100 mA)

solid conductor:

0.5 6 mm / 20 10 AWG

solid conductor 2:

0.2 1.5 mm / 24 14 AWG

standards specifications:

EN 61204-3 || EN 62368-1 || CURus 60950-1 || CURus 62368-1 || CULus 508 || CSA C22.2

strip length:

11 13 mm / 0.43 0.51 inch

strip length 2:

8 9 mm / 0.31 0.35 inch

surrounding air temperature operation:

-20 70 C

surrounding air temperature storage:

-40 85 C

transient suppression primary:

Varistor

wago connector:

WAGO 2606 Series

wago connector 2:

picoMAX 3.5 (WAGO 2091 Series)

weight:

1710.000 g

width:

80 mm / 3.15 inch