PLC-PAC and Controllers

passive connection sub-base ABE7 - 16 outputs - fuses - Led - isolator

connection sub-base accessory - snap-on terminal block - 20 screw terminals

connection sub-base ABE7 - for counter and analog channels

connection sub-base accessory - splitter sub-base - 16 channels

cabled connector - 2 m - for 140ACI03000, 140AVI03000 Modicon Quantum

This Acti9 button holder is for buttons, switches and indicators with metal or plastic flange of the SE XB4, XB5 type. It is dedicated to 22mm diameter button for control and signalling units. It could be used for control and indications auxiliaries as...

This preassembled cordset is part of the Modicon X80 modules. It is compatible with 16-channel I/O modules with removable terminal block. It enables the connection between the I/O of modules with 20-way removable terminal block and the sensors,...

This discrete output module is part of the Modicon X80 modules. It has 16 transistor protected outputs, 24V DC. This module is connected via 20-way removable terminal block. It occupies a single slot on the rack and it has a case which provides IP 20...

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This redundant power supply module has a primary voltage of 24V to 48V DC. It is a power supply module with a...

This discrete input module is part of the Modicon X80 modules. It has 32 isolated inputs and it is supplied with 24V DC. this input module with 40-way connectors is designed, for use in conjunction with the TeSys Quickfit mounting system. It occupies a...

connecting cable - Modicon Premium - 1 m - for sub-base ABE7H16R20

This cable is part of the Modicon TSX Micro range, an offer of compact and modular PLCs up to 484 I/Os. This preformed cable is used to connect the sensors, pre-actuators or terminals directly to the counting modules. The length of this cable is 3m. The...

rolled ribbon connecting cable - for I/O module with HE10 connectors - 2 m

rolled ribbon connecting cable - for I/O module with HE10 connectors - 3 m

plug-in spring connector - for XPSMC16Z configurable safety controller

plug-in screw connector - for XPSMC32Z configurable safety controller

This Modicon MCM safe relay output expansion module has 4 guided contact safety relay outputs (2 NO + 1 NC) for 2 independent outputs, 2 start/restart interlock inputs and is fitted with captive screw clamp terminals. It is designed to monitor safety...

The safe relay output module provides 4 outputs and 8 solid state at 125mA (diagnostics) discrete outputs. It is designed to monitor safety actuators for relay outputs, with a rated supply voltage of 24V DC and a maximum power dissipation of 3W. It is...

This Modicon MCM safe speed monitoring module has 2 inputs for proximity switches (with terminal blocks for wiring) and is fitted with captive screw clamp terminals. It is designed to monitor zero speed control, max speed (limited speed), speed range and...

This Modicon MCM safe input expansion module has 8 digital inputs, 4 test outputs and is fitted with captive screw clamp terminals. It is designed to monitor remotely your safe I/O. It is furnished with screw clamp terminals, removable terminal block for...