Robot Grippers

Blank aluminium fingertip for 2-Finger 140 Gripper (1 fingertip with hardware kit)

Flat silicone fingertip for 2-Finger 140 Gripper (1 fingertip with hardware kit)

Grooved fingertip for 2-Finger 140 Gripper (1 fingertip with hardware kit)

2-Finger 85 Gripper to Robotiq FT-150 sensor coupling kit (coupling with pigtail cable and hardware kit)

2-Finger 85 Gripper collaborative protector kit (2 protectors with hardware kit)

2-Finger 85 Gripper finger upgraded kit for 2-Finger Gripper (2 fingers with hardware kit)

2-Finger 140 Gripper finger upgraded kit for 2-Finger Gripper (2 fingers with hardware kit)

Robotiq blank robot mechanical coupling is suitable for use with FT300 force torque sensor. Blank coupling with FT bolt pattern on one side and the other side clear.

Blank coupling with FT bolt pattern on one side and the other side clear. Mechanical Coupling for Robotiq Force Torque Sensor FT 150 BLANK (F-100). Included:- 1 x Mechanical Coupling- 4 x M4-0.7 x 35mm - Socket Head Cap Screws Used for custom coupling.

Coupling BlankIncluded:- 1 x Coupling- 6 x 6-32 x 0.750" - Socket Head Cap Screws- 1 x 3/16 x 0.625" - Dowel Pin(for fixation with the Gripper)

End Effector Blank Coupling for 2-Finger Adaptive Robot Gripper 85. Included: - 1 x Mechanical Coupling - 4 x Screws (M5-0.8 x 35 mm SHCS) - 4 x Lock Washers (M5) - 1 x Pigtail Device Cable (CBL-COM-2066-01) - 1 x Cable Clamp - 4 x Screws (M3-0.5 x 5...

4 ports USB 2.0 hub

1 meter RS-485 to USB converter, 5 pins Combicon on one side, USB male A plug on the other.

High-Flex 10 meter cable with M12 angled connector on one side, single-ended on the other.

High-Flex 10 meter cable with M12 straight connector on one side, single-ended on the other.

Robotiq Force Torque Sensor FT 300 standard kit includes: - FT 300 sensor with no mechanical coupling - Power and communication cable - RS-485 to USB converter

Robotiq Force Torque Sensor FT 150 Standard KitIncludes: Force Torque Sensor FT 150 FT 150 Device cable USB to RS485 signal converter

Robotiq's Camera brings Plug + Play vision for Universal Robots. (Cables sold separately.) 5-minute setup time Perfect fit for all UR wrists Software embedded on UR’s user interface, Polyscope Simple object teaching interface Autonomous location...

3-Finger Adaptive Gripper with embedded Controller Included: 1 x Complete Gripper Unit: finger pads, palm pad,etc. 1 x 10 meters high flex Supply Cable - CBL-COM-2054-10-HF 1 x USB Cable - CBL-USB-2057 1 x Grease syringe - ACC-LUB-SHC1500 ...

2-Finger Adaptive Robot Gripper 140 Basic Gripper Unit. Fingertips included. Cables sold separately.