Schneider Electric ATS01N222QN Soft-Start Stop 22A 380 415V
Schneider Electric
$262.80
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric ATS01N222QN Soft-Start Stop 22A 380 415V
This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 22A. This Altistart 01 can be used for a motor rated power up to 5.5kW or 7.5hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
- Net Weight:
- 0.56 kg
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Compatibility Code:
- ATS01N2
- Electromagnetic Compatibility:
- conducted and radiated emissions level B CISPR 11 || conducted and radiated emissions level B IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || EMC immunity level 3 EN 50082-1 || EMC
- Discrete Input Voltage:
- 24...40 V
- Minimum Switching Current:
- 10 mA 6 V DC relay outputs
- Output Voltage:
- <= power supply voltage
- Power Dissipation In W:
- 124.5 W in transient state || 4.5 W at full load and at end of starting
- Product Certifications:
- CSA || UL || CCC || B44.1-96/ASME A17.5 for starter wired to the motor delta terminal || C-tick || GOST
- Type Of Start:
- start with voltage ramp
- Ambient Air Temperature For Storage:
- -25-70 °C EN/IEC 60947-4-2
- Marking:
- CE
- Discrete Input Logic:
- positive LI1, LI2, BOOST < 5 V <= 0.2 mA > 13 V, >= 0.5 mA
- Discrete Output Current:
- 2 A DC-13 || 3 A AC-15
- Discrete Input Type:
- logic LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
- Current Consumption:
- 110 A at nominal load
- Motor Starter Type:
- soft starter
- Relative Humidity:
- 5-95 % without condensation or dripping water EN/IEC 60068-2-3
- Starting Time:
- 1 s / 100 || 5 s / 20 || 10 s / 10 || adjustable from 1 to 10 s
- Function Available:
- integrated bypass
- Motor Power Kw:
- 11 kW, 3 phase 380...415 V || 7.5 kW, 3 phase 380...415 V
- Phase:
- 3 phase
- Power Range:
- 7-11 kW 380-440 V 3 phase
- Assembly Style:
- with heat sink
- Product Or Component Type:
- soft starter
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating || > 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m
- Mercury Free:
- Yes
- Discrete Output Type:
- open collector logic LO1 end of starting signal || relay outputs R1A, R1C NO
- Maximum Switching Current:
- relay outputs 2 A 250 V AC cos phi = 0.5 20 ms inductive || relay outputs 2 A 30 kV DC cos phi = 0.5 20 ms inductive
- Rohs Exemption Information:
- Yes
- China Rohs Regulation:
- X
- Discrete Output Voltage:
- 24 V 6...30 V) open collector logic
- Supply Frequency:
- 50...60 Hz - 5...5 %
- Range Of Product:
- Altistart 01
- Depth:
- 131 mm
- Warranty:
- 18 months
- Reach Free Of Svhc:
- Yes
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Toxic Heavy Metal Free:
- Yes
- Device Short Name:
- ATS01
- Starting Torque:
- 30...80 % of starting torque of motor connected directly on the line supply
- Standards:
- EN/IEC 60947-4-2
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- [Us] Rated Supply Voltage:
- 380...415 V - 10...10 %
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- [Uc] Control Circuit Voltage:
- built into the starter
- Ip Degree Of Protection:
- IP20
- Electrical Connection:
- 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit || screw connector - rigid without cable end 1 0.5...2.5 mm² AWG 14 control circuit || 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit || screw connector - rigid
- Deceleration Time Symb:
- adjustable from 1 to 10 s
- Shock Resistance:
- 15 gn 11 ms EN/IEC 60068-2-27
- Display Type:
- 1 LED Green)starter powered up || 1 LED Yellow)nominal voltage reached
- Utilisation Category:
- AC-53B EN/IEC 60947-4-2
- Network Frequency:
- 47.5...63 Hz
- Icl Starter Rating:
- 22 A
- Height:
- 154 mm
- Supply Voltage Limits:
- 342-456 V
- Operating Position:
- vertical +/- 10 degree
- Tightening Torque:
- 0.5-0.5 N.m || 1.9-2.5 N.m
- Pollution Degree:
- 2 EN/IEC 60947-4-2
- Ambient Air Temperature For Operation:
- -10-40 °C without derating) || 40-50 °C with current derating of 2 % per °C)
- Width:
- 45 mm
- Product Specific Application:
- simple machine
- Product Destination:
- asynchronous motors
- Vibration Resistance:
- 1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
- Catalog:
- View
- Datasheet:
- View
