Schneider Electric ATV650U07N4EU Atv650 Ip55 Ultype12 0,75Kw 1Hp 400V/480

(No reviews yet) Write a Review

Write a Review

Schneider Electric ATV650U07N4EU Atv650 Ip55 Ultype12 0,75Kw 1Hp 400V/480

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

ATV650U07N4EU

UPC:

3606480906978

MPN:

Condition:

New

Isolation:

between power and control terminals

Product Destination:

asynchronous motors || synchronous motors

Regulation Loop:

adjustable PID regulator

Product Specific Application:

process and utilities

Maximum Output Frequency:

500 kHz

Net Weight:

10.5 kg

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Refresh Time:

relay output R1, R2, R3)5 ms +/- 0.5 ms)

Motor Power Kw:

0.37 kW heavy duty) || 0.75 kW normal duty)

Relative Humidity:

5-95 % without condensation IEC 60068-2-3

Electrical Connection:

line side screw terminal 4...6 mm² || motor screw terminal 4...6 mm² || control removable screw terminals 0.5...1.5 mm²

Discrete Output Type:

relay outputs R1A, R1B, R1C 250 V AC 3000 mA || relay outputs R1A, R1B, R1C 30 V DC 3000 mA || relay outputs R2A, R2C 250 V AC 5000 mA || relay outputs R2A, R2C 30 V DC 5000 mA || relay outputs R3A, R3C 250 V AC 5000 mA || relay outputs R3A, R3C 30 V

Range Of Product:

Altivar Process ATV600

Linearity Error:

AO1, AO2 +/- 0.2 % analog output || AI1, AI2, AI3 +/- 0.15 % of maximum value analog input

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Analogue Input Type:

AI1, AI2, AI3 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA 250 Ohm 12 bits || AI2 voltage analog input - 10...10 V DC 31.5 kOhm 12 bits

Sampling Duration:

5 ms +/- 1 ms DI5, DI6) - discrete input || 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input || 10 ms +/- 1 ms AO1) - analog output || 2 ms +/- 0.5 ms DI1...DI4) - discrete input

Operating Position:

vertical +/- 10 degree

Rohs Exemption Information:

Yes

Analogue Output Type:

software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 10 bits || software-configurable current DQ-, DQ+ 30 V DC || software-configurable current DQ-, DQ+ 100 mA

Connector Type:

RJ45 on the remote graphic terminal)Modbus serial || RJ45 on the remote graphic terminal)Ethernet/Modbus TCP

Type Of Cooling:

forced convection

Supply:

internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for digital inputs and STO 24 V DC 21-27 V), <200 mA overload and short-circuit protection || external suppl

Enclosure Mounting:

wall mounted

[Us] Rated Supply Voltage:

380...480 V

[Us] Rated Supply Voltage:

380...480 V - 15...10 %

Data Format:

8 bits, configurable odd, even or no parity

Number Of Addresses:

1-247 Modbus serial

Vibration Resistance:

1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6

Quantity Per Set:

1

Output Voltage:

<= power supply voltage

Local Signalling:

for embedded communication status 3 LEDs (dual colour) || for communication module status 4 LEDs (dual colour) || for presence of voltage 1 LED (red) || for local diagnostic 3 LEDs

Variant:

with disconnect switch

Discrete Input Logic:

16 preset speeds

Supply Frequency:

50...60 Hz - 5...5 %

Width:

264 mm

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Relay Output Number:

3

Minimum Switching Current:

relay output R1, R2, R3 5 mA 24 V DC

Acceleration And Deceleration Ramps:

linear adjustable separately from 0.01...9999 s

Phase:

3 phase

Emc Filter:

integrated 50 m IEC 61800-3 category C2 || integrated 150 m IEC 61800-3 category C3

Operating Altitude:

1000...4800 m with current derating 1 % per 100 m || <= 3280.84 ft (1000 m) without derating

Maximum Transient Current:

2.3 A 60 s heavy duty) || 2.4 A 60 s normal duty)

Ambient Air Temperature For Storage:

-40-70 °C

Frequency Resolution:

analog input 0.012/50 Hz || display unit 0.1 Hz

Maximum Switching Current:

relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R1, R2, R3 resistive, cos phi = 1 3

Product Certifications:

UL || ATEX zone 2/22 || CSA || TÜV || ATEX INERIS || Bureau Veritas

Discrete Input Number:

8

Communication Port Protocol:

Ethernet || Modbus TCP

Depth:

300 mm

Circularity Profile:

ENVEOLI1508009EN

Height:

678 mm

Switching Frequency:

4...12 kHz with derating factor || 2...12 kHz adjustable

Standards:

IEC 61800-3 environment 1 category C2 || EN/IEC 61800-3 environment 2 category C3 || IEC 61800-5-1 || IEC 61000-3-12 || IEC 60721-3 || IEC 61508 || IEC 13849-1 || IEC 61800-3

Line Current:

1.3 A 480 V normal duty) || 0.9 A 380 V heavy duty) || 0.8 A 480 V heavy duty) || 1.5 A 380 V normal duty)

Shock Resistance:

15 gn 11 ms IEC 60068-2-27

Synchronous Motor Control Profile:

synchronous reluctance motor || permanent magnet motor

Ip Degree Of Protection:

IP55IEC 60529 || IP55IEC 61800-5-1

Protection Type:

safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-circuit protection drive || m

Mounting Mode:

wall mount

Insulation Resistance:

> 1 MOhm 500 V DC for 1 minute to earth

Transmission Frame:

RTU

Pollution Degree:

2 IEC 61800-5-1

Continuous Output Current:

1.5 A 4 kHz heavy duty || 2.2 A 4 kHz normal duty

Sustainable Offer Status:

Green Premium product

Safety Function:

STO (safe torque off) SIL 3

Product Or Component Type:

variable speed drive

Braking To Standstill:

by DC injection

China Rohs Regulation:

X

Analogue Input Number:

3

Input Compatibility:

DI5, DI6 discrete input level 1 PLC IEC 65A-68 || STOA, STOB discrete input level 1 PLC IEC 61131-2 || DI1...DI6 discrete input level 1 PLC IEC 61131-2

Prospective Line Isc:

50 kA

Type Of Polarization:

no impedance

Upgradeability:

Upgraded components available

Permissible Temporary Current Boost:

1.5 x In 60 s heavy duty) || 1.1 x In 60 s normal duty)

Discrete Input Logic:

positive logic (source) DI1...DI8), < 5 V, > 11 V || negative logic (sink) DI1...DI8), > 16 V, < 10 V

Ambient Air Temperature For Operation:

40-50 °C with derating factor) || -15-40 °C without derating)

Asynchronous Motor Control Profile:

constant torque standard || optimized torque mode

Discrete Output Number:

0

Maximum Thdi:

<48 % full load IEC 61000-3-12

Noise Level:

52 dB

Marking:

CE

Analogue Output Number:

2

Method Of Access:

slave Modbus TCP

Device Short Name:

ATV650

Maximum Horse Power Rating:

0.5 hp heavy duty || 1 hp normal duty

Nominal Switching Frequency:

4 kHz

Electromagnetic Compatibility:

radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5 || conducted radio-frequency im

Relay Output Type:

configurable relay logic R2 sequence relay NO 100000 cycles || configurable relay logic R3 sequence relay NO 100000 cycles || configurable relay logic R1 fault relay NO/NC 100000 cycles

Environmental Disclosure:

ENVPEP1508009EN

Transmission Rate:

10, 100 Mbits || 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps

Pollution Degree:

3

Mercury Free:

Yes

Speed Drive Output Frequency:

0.1-500 Hz

Accuracy:

+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output || +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input

Motor Slip Compensation:

adjustable || can be suppressed || automatic whatever the load || not available in permanent magnet motor law

Exchange Mode:

half duplex, full duplex, autonegotiation Ethernet/Modbus TCP

Noise Level:

52 dB 86/188/EEC

Discrete Input Type:

DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V)

Overvoltage Category:

III

Option Card:

slot A communication module, PROFINET || slot A communication module, DeviceNet || slot A communication module, Modbus TCP/EtherNet/IP || slot A communication module, CANopen daisy chain RJ45 || slot A communication module, CANopen SUB-D 9 || slot A

Apparent Power:

0.7 kVA 480 V heavy duty) || 1.1 kVA 480 V normal duty)

Physical Interface:

Ethernet || 2-wire RS 485

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Degree Of Protection:

UL type 12 UL 508C