Schneider Electric BMH0703P16F2A Motor 70Mm Iec 3,4Nm Ip54 1320W Key
Schneider Electric
$1,204.53
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed of 8000RPM, parallel keyed shaft and holding brake. It is equipped with a SinCos Hiperface® encoder (32768 points/turn) for automatic transmission of data from the servo motor to the servo drive. BMH servo motor is medium inertia motor, it is particularly suitable for high-load applications and allows the movement to be adjusted in a more robust manner. It is a synchronous servo motor with a rated supply voltage of 480V, a continuous stall current of 3.91A and a continuous power of 1.68W. The shaft dimensions are 14mm (Diameter) x 30mm (Length). It is furnished with rotatable right-angled connectors for electrical connection. It is an IP54 rated product. Its dimensions are 225mm (Length) x 70mm (Width), centring collar dimensions are 2.5mm (Depth) x 60mm (Diameter) with 82mm circle diameter of the mounting hole. It weighs 4kg. This product is compatible with Lexium 32 servo drives. It supports international standard 70mm flange mount with a natural convection cooling system. Encoder gives the absolute position of the motor so that flows can be synchronized and sends data from the servo motor to the servo drive, which provides automatic identification of the motor when the servo drive starts. BMH servo motor with a 3-phase stator and neodymium iron boron (NdFeB) magnets. Casing with RAL 9005 opaque black paint protective coating. 4-point axial mounting flange. Cables and connectors to be ordered separately.
- Holding Torque:
- 3 N.m holding brake
- Key Width:
- 20 mm
- Mercury Free:
- Yes
- Shaft End:
- keyed
- Number Of Motor Stacks:
- 3
- Mounting Holes Diameter:
- 5.5 mm
- Net Weight:
- 4 kg
- Length:
- 225 mm
- Number Of Motor Poles:
- 10
- Mounting Support:
- international standard flange
- Nominal Torque:
- 2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
- Nominal Speed:
- 5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
- Rotor Inertia:
- 1.78 kg.cm²
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Back Emf Constant:
- 55.8 V/krpm 120 °C
- Stator Resistance:
- 2.65 Ohm 20 °C
- Electrical Connection:
- rotatable right-angled connectors
- Pvc Free:
- Yes
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Product Or Component Type:
- servo motor
- Sustainable Offer Status:
- Green Premium product
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Warranty:
- 18 months
- Peak Stall Torque:
- 10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
- Feedback Type:
- single turn SinCos Hiperface
- [Us] Rated Supply Voltage:
- 480 V
- Speed Feedback Resolution:
- 32768 points/turn
- Maximum Current Irms:
- 12.6 A LXM32.D18N4
- Environmental Disclosure:
- ENVPEP111002EN
- Rohs Exemption Information:
- Yes
- Circle Diameter Of The Mounting Holes:
- 82 mm
- Type Of Cooling:
- natural convection
- Continuous Stall Current:
- 3.91 A
- Maximum Axial Force Fa:
- 0.2 x Fr
- Motor Flange Size:
- 70 mm
- Maximum Permanent Current:
- 12.57 A
- Nominal Output Power:
- 1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
- Range Compatibility:
- Lexium 32
- Stator Inductance:
- 8.6 mH 20 °C
- Circularity Profile:
- N/A
- Continuous Stall Torque:
- 3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
- Device Short Name:
- BMH
- Holding Brake:
- with
- Brake Pull-In Power:
- 7 W
- Number Of Mounting Holes:
- 4
- Product Compatibility:
- LXM32.D18N4 400...480 V three phase
- Maximum Radial Force Fr:
- 730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
- Shaft Diameter:
- 14 mm
- Phase:
- three phase
- Second Shaft:
- without second shaft end
- Ip Degree Of Protection:
- IP54 standard
- Continuous Power:
- 1.68 W
- Torque Constant:
- 0.87 N.m/A 120 °C
- Shaft Length:
- 30 mm
- Centring Collar Depth:
- 2.5 mm
- Maximum Mechanical Speed:
- 8000 rpm
- Centring Collar Diameter:
- 60 mm
- China Rohs Regulation:
- X
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Stator Electrical Time Constant:
- 3.2 ms 20 °C
- Datasheet:
- View
Related Products
-
-
-
Schneider Electric BMH0703P07A2A Motor 70Mm Iec 3,4Nm Ip54 1320W No Key
$1,252.28Schneider Electric
-
