Schneider Electric ILE2E661PB1A1 Lexium Ile Bldc Mot 24 48V Ethcat Gear
SKU:
ILE2E661PB1A1
UPC:
3.60649E+12
MPN:
Condition:
New
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Vibration Resistance:
20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
Mounting Support:
flange
[Us] Rated Supply Voltage:
48 V || 24 V
Motor Type:
brushless DC motor
Current Consumption:
7000 mA peak || 5500 mA maximum continuous
Product Certifications:
TÃV || cUL || UL
Network Type:
DC
Maximum Torsional Backlash:
1 °
Detent Torque:
1.42 N.m
Number Of Mounting Holes:
4
China Rohs Regulation:
X
Accuracy Error:
+/- 0.5 point
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Transmission Rate:
100 Mbits
Shaft End:
keyed
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Holding Brake:
without
Electrical Connection:
printed circuit board connector
Product Or Component Type:
motion integrated drive
Nominal Torque:
3.5 N.m 24 V || 3.5 N.m 48 V
Peak Stall Torque:
6.19 N.m 24 V || 6.19 N.m 48 V
Commissioning Interface:
RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Voltage State 0 Guaranteed:
-3...4.5 V
Range Of Product:
Lexium integrated drive
Environmental Disclosure:
ENVPEP1411012EN
Continuous Stall Torque:
4.3 N.m
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Permissible Ambient Air Temperature Around The Device:
105 °C power amplifier || 110 °C motor
Voltage State 1 Guaranteed:
15...30 V
Maximum Radial Force Fr:
200 N long-term operation) || 200 N short-term operation)