Schneider Electric ILE2K661PC1A1 Lexium Ile Bldc Mot 24 48V Eth Ip Gear

(No reviews yet) Write a Review
SKU:
ILE2K661PC1A1
UPC:
3.60649E+12
Condition:
New
Number Of Motor Stacks:
1
Maximum Axial Force Fa:
10 N long-term operation) || 80 N short-term operation)
Product Or Component Type:
motion integrated drive
Nominal Speed:
225 rpm 24 V || 281 rpm 48 V
Transmission Rate:
125, 250, 500 kbauds
Detent Torque:
1.42 N.m
Permissible Ambient Air Temperature Around The Device:
105 °C power amplifier || 110 °C motor
Relative Humidity:
15-85 % without condensation
Pvc Free:
Yes
Service Life In Hours:
2500 h bearing short-term operation || 15000 h bearing long-term operation
Peak Stall Torque:
6.19 N.m 24 V || 6.19 N.m 48 V
Input/Output Type:
4 signals (each be used as input or output)
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Centring Collar Depth:
4 mm
Rohs Exemption Information:
Yes
Shaft Length:
25 mm
Accuracy Error:
+/- 0.5 point
Voltage State 0 Guaranteed:
-3...4.5 V
Circle Diameter Of The Mounting Holes:
73.54 mm
Standards:
EN 61800-3 : 2001-02 || IEC 50347 || IEC 50178 || IEC 60072-1 || IEC 61800-3, Ed 2 || IEC 61800-3 || EN 61800-3:2001, second environment
Holding Brake:
without
Environmental Disclosure:
ENVPEP1411012EN
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Sustainable Offer Status:
Green Premium product
Second Shaft:
without second shaft end
Current Consumption:
7000 mA peak || 5500 mA maximum continuous
Ip Degree Of Protection:
shaft bushing IP41 IEC 60034-5 || total except shaft bushing IP54 IEC 60034-5
Product Certifications:
TÜV || cUL || UL
Feedback Type:
BLDC encoder
Warranty:
18 months
Number Of Mounting Holes:
4
Mounting Support:
flange
Nominal Torque:
3.5 N.m 24 V || 3.5 N.m 48 V
Winding Type:
medium speed of rotation and medium torque
Shaft End:
keyed
Marking:
CE
Length:
174 mm
Rotor Inertia:
48 kg.cm²
Maximum Mechanical Speed:
281 rpm
Speed Feedback Resolution:
1.667° gearbox output || 12 points/turn motor
Phase:
single phase
Associated Fuse Rating:
16 A
Reduction Ratio:
18:1 (160:9)
Supply Voltage Limits:
18-55.2 V
Device Short Name:
ILE
Discrete Output Voltage:
23...25 V
Centring Collar Diameter:
16 mm
Discrete Input Current:
10-10 mA at 24 V on/STO_A safety input || 3-3 mA at 24 V on/STO_B safety input || 2-2 mA at 24 V 24 V signal interface
Maximum Radial Force Fr:
200 N long-term operation) || 200 N short-term operation)
Net Weight:
1.85 kg
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mounting Holes Diameter:
4.4 mm
Commissioning Interface:
RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Range Of Product:
Lexium integrated drive
Circularity Profile:
ENVEOLI1411012EN
Type Of Cooling:
natural convection
Maximum Torsional Backlash:
1 °
Key Width:
16 mm
Communication Interface:
Ethernet/IP, Integrated
Mercury Free:
Yes
Maximum Switching Current:
100 mA per output || 200 mA total
Electrical Connection:
industrial connector
Voltage State 1 Guaranteed:
15...30 V
Nominal Output Power:
119 W 48 V || 95 W 24 V
Gear Box Type:
straight teeth gear, 3 stages
Protection Type:
overload of output voltage || short circuit of the output voltage || safe torque off
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Motor Type:
brushless DC motor
Shaft Diameter:
10 mm
China Rohs Regulation:
X
Shock Resistance:
150 m/s² 1000 shocks IEC 60068-2-29
Motor Flange Size:
66 mm
Vibration Resistance:
20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
Ambient Air Temperature For Storage:
-25-70 °C
Continuous Stall Torque:
4.3 N.m
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
[Us] Rated Supply Voltage:
24 V || 48 V
Number Of Motor Poles:
6
Network Type:
DC
Ambient Air Temperature For Operation:
40-55 °C with power derating of 2 % per °C) || 0-40 °C without derating)
Maximum Supply Current:
0.1 A power stage disabled) || 6.8 A 24 V || 3.8 A 48 V
Catalog:
View
Datasheet:
View
  • Schneider Electric ILE2K661PC1A1 Lexium Ile Bldc Mot 24 48V Eth Ip Gear
  • Schneider Electric ILE2K661PC1A1 Lexium Ile Bldc Mot 24 48V Eth Ip Gear
$1,740.00

Description

This product is part of the Lexium ILE range, an offer of integrated motion drives for motion control. The motion integrated drive with a 6-pole brushless DC motor features an integrated EtherNet/IP communication interface and keyed shaft without holding brake. The brushless DC motor with a rated supply voltage of 24V, 48V DC, a peak current consumption of 7000mA and a nominal speed of 281RPM at 48V. The shaft dimensions are 10mm (diameter) x 25mm (length). It is furnished with industrial connector for electrical connection. It is an IP41 (shaft bushing) and IP54 (total except shaft bushing) rated product. Its dimensions are 174mm (length) x 66mm (width) and the centering collar dimensions are 4mm (depth) x 16mm (diameter) with 73.54mm mounting hole. Its weighs 1.85kg. It is suitable for printing, paper, packaging, handling, labelling, textile industry, electronics manufacture and medical technology applications. This product is certified by CE, TUV, CUL and UL. It meets EN/IEC 61800-3, EN 61800-3 2001, EN/IEC 50178, EN 61800-3 2001-02, IEC 61800-3, Ed 2 and EN 50347 standards. It supports 66mm flange mount with a natural convection cooling system. Lexium integrated drives integrate motor, positioning controller, power electronics, Fieldbus and safety function in a single device. Integrated drives for motion control with stepper, servo or brushless DC motor.
View AllClose