Schneider Electric

Schneider Electric LC2D65AG7 TeSys Deca reversing contactor - 3P(3 NO) - AC-3 - <= 440 V 65 A - coil 120 V AC 60 Hz

(No reviews yet) Write a Review
SKU:
LC2D65AG7
MPN:
LC2D65AG7
Condition:
New
Weight:
1.89 kg
Maximum Horse Power Rating:
40 hp at 460/480 V AC 60 Hz for 3 phase motors || 5 hp at 115 V AC 60 Hz for 1 phase motors || 10 hp at 230/240 V AC 60 Hz for 1 phase motors || 20 hp at 200/208 V AC 60 Hz for 3 phase motors || 20 hp at 230/240 V AC 60 Hz for 3 phase motors || 50 hp
Flame Retardance:
V1 conforming to UL 94
Rohs Exemption Information:
Yes
Heat Dissipation:
4-5 W 60 Hz
Pvc Free:
Yes
Device Short Name:
LC2D
Insulation Resistance:
> 10 MOhm for Signaling circuit
Signaling Circuit Frequency:
25...400 Hz
Range:
TeSys || TeSys Deca
Poles Description:
3P
Ambient Air Temperature For Storage:
-60-80°C
Average Impedance:
1.5 mOhm - Ith 80 A 50 Hz for power circuit
Warranty:
18 months
Interlocking Type:
mechanical
Motor Power Kw:
18.5 kW at 220...230 V AC 50 Hz || 30 kW at 380...400 V AC 50 Hz || 37 kW at 415...440 V AC 50 Hz || 37 kW at 500 V AC 50 Hz || 37 kW at 660...690 V AC 50 Hz
Connections - Terminals:
control circuit screw clamp terminals 1 1-4 mm²flexible without cable end || control circuit screw clamp terminals 2 1-4 mm²flexible without cable end || control circuit screw clamp terminals 1 1-4 mm²flexible with cable end || control circuit scr
Hold-In Power Consumption In Va:
13-13 VA 60 Hz cos phi 0.3 (at 20°C)
Mechanical Robustness:
vibrations contactor open2 Gn, 5...300 Hz || vibrations contactor closed4 Gn, 5...300 Hz || shocks contactor open10 Gn for 11 ms || shocks contactor closed15 Gn for 11 ms
Ambient Air Temperature For Operation:
-40-60°C || 60-70°C with derating
Country of Origin:
France
Utilisation Category:
AC-3 || AC-1 || AC-3e
Width:
119 mm
Reach Free Of Svhc:
Yes
[Uc] Control Circuit Voltage:
120 V AC 60 Hz
Irms Rated Making Capacity:
140 A AC for Signaling circuit conforming to IEC 60947-5-1 || 250 A DC for Signaling circuit conforming to IEC 60947-5-1 || 1000 A at 440 V for power circuit conforming to IEC 60947
[Ue] Rated Operational Voltage:
power circuit <= 690 V AC 25...400 Hz || power circuit <= 300 V DC
Inrush Power In Va:
140-140 VA 60 Hz cos phi 0.75 (at 20°C)
Product Certifications:
UL || CSA || RINA || GOST || CCC || DNV || LROS (Lloyds register of shipping) || GL || BV || UKCA
Environmental Disclosure:
ENVPEP1503009EN
Maximum Operating Rate:
3600 cyc/h 60°C
[Ui] Rated Insulation Voltage:
power circuit 690 V IEC 60947-4-1 || power circuit 600 V CSA || power circuit 600 V UL || Signaling circuit 690 V IEC 60947-1 || Signaling circuit 600 V CSA || Signaling circuit 600 V UL
Eu Rohs Directive:
Compliant
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Pollution Degree:
3
Product Or Component Type:
reversing contactor
Tightening Torque:
control circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2 || power circuit 8 N.m EverLink BTR screw connectors 25-35 mm² hexagonal 4 mm || power circuit 5 N.m EverLink BTR screw connecto
Operating Time:
4...19 ms opening || 12...26 ms closing
Safety Reliability Level:
B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
Device Presentation:
preassembled with reversing power busbar
Depth:
120 mm
Ip Degree Of Protection:
IP20 front face IEC 60529
Standards:
CSA C22.2 No 14 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 508 || IEC 60335-1
Protective Cover:
with
[Ith] Conventional Free Air Thermal Current:
10 A (at 60°C) for Signaling circuit || 80 A (at 60°C) for power circuit
Height:
122 mm
Control Circuit Voltage Limits:
0.3...0.6 Uc -40-70°C drop-out AC 60 Hz || 0.85...1.1 Uc -40-60°C operational AC 60 Hz || 1...1.1 Uc 60-70°C operational AC 60 Hz
Auxiliary Contact Composition:
1 NO + 1 NC
Minimum Switching Voltage:
17 V for Signaling circuit
Operating Altitude:
0...9842.52 ft (0...3000 m)
$985.32

Description

LC2D65AG7 is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications. Rated 65A AC-3 30kW@400V, it includes a 120V 50/60Hz AC coil, 2NO+2NC aux contacts, a mechanical interlock. LC2D65AG7 is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications up to 30kW@400V. It includes a 120V 50/60Hz AC coil and 2NO+2NC built-in auxiliary contacts, NC mirror certified. Compact, DIN-rail mounting, with mechanical interlock and pre-wired reversing circuit, it procures reliability and durability. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Compact product, 119mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Clear separation between power and control circuits, easy front access to coil and auxiliary contacts connections. Equipped with a 120V AC coil that can be supplied at 50Hz or 60Hz. Provides 4 built-in auxiliary contacts 2NO + 2NC, NC contacts are mirror certified suitable to be included in the control of safety systems. High electrical durability, guaranteed for 1.6 million cycles at 65A AC-3 440V, for demanding motor switching applications. Robust design with high making and breaking capacities up to 20 In. Power connections by EverLink BTR screw terminals providing constant tightening pressure.
View AllClose

Related Products

Related Products