Schneider Electric

Schneider Electric LJM36600U31X Molded Case Circuit Breaker 600V 400A

(No reviews yet) Write a Review
SKU:
LJM36600U31X
UPC:
7.85901E+11
Condition:
New
Pollution Degree:
3 IEC 60947-1
Trip Unit Technology:
electronic, standard, MicroLogic 3.3, LI
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Control Type:
toggle
Circularity Profile:
ENVEOLI2206029EN
Network Frequency:
50/60 Hz
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Pvc Free:
Yes
Awg Gauge:
2 x AWG 2/0...500 kcmil aluminium/copper
Circuit Breaker Application:
HACR rated
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Device Short Name:
L-Frame
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Height:
340 mm
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Line Rated Current:
600-600 A
Sustainable Offer Status:
Green Premium product
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Wire Stripping Length:
31 mm || 61 mm
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Ambient Air Temperature For Operation:
-2-70 °C
Range:
PowerPact
Product Or Component Type:
circuit breaker
Suitability For Isolation:
yes IEC 60947-2
Mounting Mode:
unit mount lug)
Product Name:
PowerPact L
Device Application:
distribution
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Rohs Exemption Information:
Yes
Net Weight:
6.2 kg
Environmental Disclosure:
ENVPEP2206029EN
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Warranty:
18 months
Mounting Support:
lug
Product Certifications:
UL || CSA || NOM
Continuous Current Rating:
0.8
Eu Rohs Directive:
Compliant with Exemptions
Trip Unit Name:
MicroLogic 3.3
Width:
140 mm
Mercury Free:
Yes
Breaking Capacity Code:
J
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Ambient Air Temperature For Storage:
-50-85 °C
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Tightening Torque:
50-50 N.m 70-240 mm² (AWG 2/0...500 kcmil)
Electrical Connection:
lugs, line || terminal nut, load
Terminal Identifier:
AL600LS52K3
Communication Interface:
Modbus || Ethernet
Ip Degree Of Protection:
front cover IP40
Poles Description:
3P
Depth:
110 mm
Utilisation Category:
category A
Color:
Black
Brochure:
View
Catalog:
View
Datasheet:
View
$10,541.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 600A, 3 pole, circuit breaker has an interrupting rating of 25kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3 trip unit and an LI function. This unit has lugs on the line side and terminal nuts on the load side. This circuit breaker has a continuous current rating of 80%. This circuit breaker has a continuous current rating of 80%. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose