Schneider Electric SH31002P11A1000 Sh3 Motor 100.2 Key Sgl Str Ip54
SKU:
SH31002P11A1000
UPC:
3.60648E+12
MPN:
Condition:
New
Maximum Current Irms:
17.1 A
China Rohs Regulation:
X
Continuous Power:
1900 W
Mounting Support:
international standard flange
[Us] Rated Supply Voltage:
115...480 V
Length:
204.5 mm
Range Compatibility:
PacDrive 3
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm
Shaft End:
parallel key
Back Emf Constant:
77 V/krpm 20 °C
Maximum Axial Force Fa:
160 N
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Nominal Output Power:
580 W 115 V single phase || 1090 W 230 V single phase || 1930 W 400 V three phase || 2210 W 480 V three phase
Shaft Length:
40 mm
Continuous Stall Current:
4.8 A
Continuous Stall Torque:
5.8 N.m 115...480 V three phase
Circle Diameter Of The Mounting Holes:
115 mm
Net Weight:
5.8 kg
Rotor Inertia:
2.31 kg.cm²
Number Of Mounting Holes:
4
Mercury Free:
Yes
Nominal Speed:
1000 rpm 115 V single phase || 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
Pvc Free:
Yes
Torque Constant:
1.21 N.m/A 120 °C
Number Of Motor Poles:
4
Shaft Diameter:
19 mm
Mounting Holes Diameter:
9.0 mm
Environmental Disclosure:
ENVPEP111049EN
Device Short Name:
SH3.....P
Motor Flange Size:
100 mm
Maximum Mechanical Speed:
6000 rpm
Product Or Component Type:
servo motor
Peak Stall Torque:
18.3 N.m 115...480 V three phase
Key Width:
6 mm
Warranty:
18 months
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Nominal Torque:
5.5 N.m 115 V single phase || 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
Rohs Exemption Information:
Yes
Centring Collar Depth:
3.5 mm
Stator Resistance:
2.4 Ohm
Encoder Type:
absolute single turn SinCos Hiperface
Holding Brake:
without
Centring Collar Diameter:
95 mm
Type Of Cooling:
natural convection
Stator Inductance:
19.5 mH
Circularity Profile:
N/A
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
