Schneider Electric SSD1A320BDRC1 Solid State Relay-Din Rail, Single Phase
Schneider Electric
$60.30
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric SSD1A320BDRC1 Solid State Relay-Din Rail, Single Phase
This solid state DIN rail mounted relay belongs to the Schneider Electric Harmony solid state relays range. This electrical relay mounts on 35mm DIN rail and comes with a secure mounting latch. This is a 20A power rated relay with relay type configuration and random switching. This single-phase relay has a IP20 built-in heat sink and a built-in transient overvoltage protection. It is controlled with a 4Vdc to 32Vdc input, has a rated load voltage of 48Vac to 600Vac. It also has a LED input voltage status indicator and clip-in legend for easy identification. It weighs 0.280Kg and its dimensions are, 22.5mm wide, 116.6mm deep, 93.2mm high. It is the ideal solution for packaging, plastic molding, textile, and heating furnace applications. This relay conforms to international standards like EN/IEC 60068, IEC 61373, UL 508, CSA C22.2 No 14-13 and certifications like UL and CSA. Besides the existing standard screw connection for input and output, SSD provides more wiring options like the spring or screw pluggable input connectors, and telescopic or clamp cage output terminals.
- Height:
- 93.2 mm
- Inrush Current:
- 300 A at 60 Hz
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Device Short Name:
- SSD1
- Product Configuration Type:
- relay configuration
- China Rohs Regulation:
- X
- Solid State Output Type:
- random voltage switching
- Pollution Degree:
- 2
- Mounting Support:
- 35 mm symmetrical DIN rail conforming to IEC 60715
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Number Of Channels:
- 1
- Response Time:
- 0.1 ms (turn-on) || 0.5 cycle (turn-off)
- Mercury Free:
- Yes
- Ambient Air Temperature For Storage:
- -40-100 °C
- Input Current Limits:
- 10-15 mA
- Coordination Type:
- type 1 || type 2
- Absolute Maximum Voltage:
- 1200 V
- Flame Retardance:
- V-0 conforming to UL 94
- Range Of Product:
- Harmony Solid State Relays
- Phase:
- 1 phase
- Maximum Switching Voltage:
- 1 V DC turn-off
- Product Or Component Type:
- solid state relay up to 20 A
- Tightening Torque:
- 1.5...1.7 N.m for control input || 13...15 lb.in for control input || 1.5...1.7 N.m for load output || 13...15 lb.in for load output
- Maximum Voltage Drop:
- <1.3 V on-state
- Line Rated Current:
- 20 A
- Local Signalling:
- for control voltage LED (green)
- Connections - Terminals:
- screw terminals, clamping connection capacity:1...4 mm², AWG 18...AWG 12 for input || screw terminals, clamping connection capacity:1...6 mm², AWG 18...AWG 10 for output
- Width:
- 22.5 mm
- Load Current:
- 0.1-20 A
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Net Weight:
- 0.298 kg
- [Uimp] Rated Impulse Withstand Voltage:
- 6 kV for input/output circuit || 6 kV for input or output to case
- Power Factor:
- 0.5 with maximum load
- Maximum Leakage Current:
- 1 mA off-state
- Contact Form:
- Form 5 semiconductor output DOL contactor
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Depth:
- 116.5 mm
- Standards:
- IEC 61373:class B: category 1 || IEC 60947-4-3 || IEC 62314 || IEC 60950-1 || CSA C22.2 No 14-13 || UL 508
- Dv/Dt:
- 500 V/µs off-state at maximum rated voltage
- Electromagnetic Compatibility:
- electrostatic discharge 6 kV criteria A contact discharge conforming to IEC 61000-4-2 || electrostatic discharge 8 kV criteria A air discharge conforming to IEC 61000-4-2 || conducted RF disturbances 10 V, 0.15...80 MHz criteria A level 3 conforming
- Vibration Resistance:
- 0.75 mm (f = 10-150 Hz) conforming to IEC 60068-2-6
- Circularity Profile:
- ENVEOLI1508007EN
- Dielectric Strength:
- 4 kV AC for input/output circuit || 4 kV AC for input or output to case
- Environmental Disclosure:
- ENVPEP1508007EN
- Overvoltage Category:
- III
- [Uc] Control Circuit Voltage:
- 4...32 V DC
- Rohs Exemption Information:
- Yes
- Shock Resistance:
- 50 gn for 11 ms (peak acceleration) , longitudinal position conforming to IEC 60068-2-27 || 30 gn for 11 ms (peak acceleration) , vertical position conforming to IEC 60068-2-27
- Output Voltage:
- 48...600 V AC
- Device Presentation:
- complete product
- Motor Power Kw:
- 0.37 kW/0.5 hp at 120 V AC || 1.12 kW/1.5 hp at 240 V AC || 2.24 kW/3 hp at 480 V AC
- Maximum I²T For Fusing:
- 409 A².s for 10 ms || 375 A².s for 8.33 ms
- Ambient Air Temperature For Operation:
- -40-80 °C
- Minimum Switching Voltage:
- 4 V DC turn-on
- Sustainable Offer Status:
- Green Premium product
- Network Frequency:
- 47...440 Hz
- Output Switching Mode:
- random voltage switching
- Ip Degree Of Protection:
- IP20
- Rated Duty:
- uninterrupted
- Insulation Resistance:
- 1000 MOhm at 500 V DC
- Catalog:
- View
- Datasheet:
- View
