Schneider Electric STBDAI7220K 230Vac In 2Pt Kit Conns,
Schneider Electric
$131.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric STBDAI7220K 230Vac In 2Pt Kit Conns,
standard digital input kit - Modicon STB - 230 V AC - 2 I
- Product Or Component Type:
- standard digital input kit
- Product Compatibility:
- power distribution module STBPDT2100/2105 || I/O base STBXBA2000
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Pollution Degree:
- 2 IEC 60664-1
- Current State 1 Guaranteed:
- >= 4 mA
- Status Led:
- 1 LED (Green) module status (RDY) || 1 LED per channel (Green) channel status (IN1 to IN2) || 1 LED (Red) module error (ERR)
- Network Frequency Limits:
- 47-63 Hz
- Discrete Input Voltage:
- 230 V
- Hot Swapping Fallback:
- yes for standard NIMs
- Ambient Air Temperature For Storage:
- -40-85 °C without derating
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Net Weight:
- 0.122 kg
- Ambient Air Temperature For Storage:
- -40...185 °F without derating
- Input Voltage Limits:
- 0...40 V at state 0 || 159...256 V at state 1
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Response Time:
- 1.5 ms off-to-on || 1.5 ms on-to-off
- Mercury Free:
- Yes
- Height:
- 18.4 mm
- Width:
- 125 mm
- Range Of Product:
- Modicon STB distributed I/O solution
- Standards:
- EN/IEC 61131-2 type 1
- Overvoltage Category:
- II
- Shock Resistance:
- 30 gn 11 ms IEC 88 reference 2-27
- Depth:
- 65.1 mm
- Operating Altitude:
- <= 6561.68 ft (2000 m)
- Network Frequency:
- 50/60 Hz
- Protection Type:
- power protection integrated fuse on PDM time lag 10 A || input protection resistor-limited
- Ambient Air Temperature For Operation:
- 32...140 °F without derating
- Rohs Exemption Information:
- Yes
- Product Certifications:
- CSA || UL || FM Class 1 Division 2
- Kit Composition:
- STBXTS1110, 5-terminal screw type connector || STBDAI7220 module || STBXTS2110, 5-terminal spring clamp connector || STBXBA2000 base
- Current State 0 Guaranteed:
- <= 2 mA
- Vibration Resistance:
- 3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail || +/-0.35 mm 10-58 Hz
- Supply:
- power distribution module
- Absolute Maximum Voltage:
- 400 V 20 ms
- China Rohs Regulation:
- X
- Warranty:
- 18 months
- [Us] Rated Supply Voltage:
- 115/230 V AC
- Relative Humidity:
- 95-95 % 60-60 °C without condensation
- Cold Swapping:
- yes
- Discrete Input Voltage Type:
- AC
- Marking:
- CE
- Insulation Between Channels And Logic Bus:
- 1780 V for 1 minute
- Ambient Air Temperature For Operation:
- 0-60 °C without derating)
- Permissible Voltage:
- 265 V
- Ip Degree Of Protection:
- IP20 conforming to IEC 61131-2 class 1
- Current Consumption:
- 40 mA 5 V DC logic bus
- Discrete Input Number:
- 2
- Catalog:
- View
- Datasheet:
- View
