Schneider Electric TM241C24U Controller M241-24Io Tr.Npn

(No reviews yet) Write a Review
SKU:
TM241C24U
UPC:
3.60648E+12
Condition:
New
Accuracy:
+/- 0.1 % 0.02-0.1 kHz fast output || +/- 1 % 0.1-1 kHz fast output
Communication Port Protocol:
non isolated serial link Modbus master/slave
Input Impedance:
4.7 kOhm input || 2.81 kOhm fast input
Shock Resistance:
15 gn 11 ms
Counting Input Number:
4 fast input (HSC mode) 200 kHz || 14 standard input 1 kHz
Vibration Resistance:
3.5 mm 5-8.4 Hz symmetrical rail || 3 gn 8.4-150 Hz symmetrical rail || 3.5 mm 5-8.4 Hz panel mounting || 3 gn 8.4-150 Hz panel mounting
Output Voltage Limits:
30 V DC
Discrete Input Logic:
sink or source
Resistance To Conducted Disturbances:
10 V 0.15...80 MHz IEC 61000-4-6 || 3 V 0.1...80 MHz Marine specification (LR, ABS, DNV, GL) || 10 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) Marine specification (LR, ABS, DNV, GL)
Height:
90 mm
Local Signalling:
for PWR 1 LED (green) || for RUN 1 LED (green) || for module error (ERR) 1 LED (red) || for I/O error (I/O) 1 LED (red) || for SD card access (SD) 1 LED (green) || for BAT 1 LED (red) || for SL1 1 LED (green) || for SL2 1 LED (green) || for bus fault
Inrush Current:
50 A
Insulation:
between supply and internal logic 500 V AC || non-insulated between supply and ground || between input and internal logic 500 V AC || non-insulated between inputs || between fast input and internal logic 500 V AC || between output and internal logic
Memory Capacity:
64 MB system memory RAM
Application Structure:
4 cyclic master tasks || 8 external event tasks || 8 event tasks || 3 cyclic master tasks + 1 freewheeling task
Marking:
CE
Discrete Output Current:
0.5 A transistor output Q0...Q9) || 0.1 A fast output (PTO mode) Q0...Q3)
Pvc Free:
Yes
Power Consumption In W:
32.6-40.4 W with max number of I/O expansion module)
Ip Degree Of Protection:
IP20 with protective cover in place
Maximum Voltage Drop:
<1 V
Transmission Rate:
1.2...115.2 kbit/s (115.2 kbit/s by default) 15-15 m RS485 || 1.2...115.2 kbit/s (115.2 kbit/s by default) 3-3 m RS232 || 480 Mbit/s 3-3 m USB
Depth:
95 mm
Maximum Number Of I/O Expansion Module:
7 (local I/O-Architecture) || 14 (remote I/O-Architecture)
Integrated Connection Type:
non isolated serial link serial 1 RJ45 RS232/RS485 || non isolated serial link serial 2 removable screw terminal block RS485 || USB port mini B USB 2.0
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Ambient Air Temperature For Operation:
-10-50 °C vertical installation) || -10-55 °C horizontal installation)
Ambient Air Temperature For Storage:
-25-70 °C
Backup Time:
2 years 25 °C
Standards:
ANSI/ISA 12-12-01 || CSA C22.2 No 142 || CSA C22.2 No 213 || IEC 61131-2:2007 || Marine specification (LR, ABS, DNV, GL) || UL 508
Discrete Input Number:
14 , discrete input 8 fast input IEC 61131-2 Type 1
Electrical Connection:
removable screw terminal block for inputs and outputs pitch 5.08 mm) || removable screw terminal block for connecting the 24 V DC power supply pitch 5.08 mm)
Width:
150 mm
Discrete Input Voltage:
24 V
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Supply:
serial 1)serial link supply 5 V, <200 mA
China Rohs Regulation:
X
Maximum Cable Distance Between Devices:
unshielded cable <50 m input || shielded cable <10 m fast input || unshielded cable <50 m output || shielded cable <3 m fast output
Mounting Support:
top hat type TH35-15 rail IEC 60715 || top hat type TH35-7.5 rail IEC 60715 || plate or panel with fixing kit
Rohs Exemption Information:
Yes
Environmental Disclosure:
ENVPEP1307080EN
Response Time:
50 µs turn-on, I0...I13 input || 50 µs turn-off, I0...I13 input || <= 2 µs turn-on, I0...I7 fast input || <= 2 µs turn-off, I0...I7 fast input || <= 34 µs turn-on, Q0...Q9 output || <= 250 µs turn-off, Q0...Q9 output || <= 2 µs turn-on, Q0...Q3 fast
Relative Humidity:
10-95 %, without condensation in operation) || 10-95 %, without condensation in storage)
Discrete Output Number:
10 transistor 4 fast output
Pollution Degree:
2
Circularity Profile:
ENVEOLI1307080EN
Control Signal Type:
A/B 100 kHz fast input (HSC mode) || pulse/direction 200 kHz fast input (HSC mode) || single phase 200 kHz fast input (HSC mode)
Data Backed Up:
128 MB built-in flash memory backup of user programs
Storage Altitude:
0-3000 m
Immunity To Microbreaks:
10 ms
Positioning Functions:
PTO 4 100 kHz) || PTO 4 transistor output 1 kHz)
Voltage State 1 Guaranteed:
>= 15 V input
Protection Type:
short-circuit protection || short-circuit and overload protection with automatic reset || reverse polarity protection fast output
Configurable Filtering Time:
1 µs fast input || 12 ms fast input || 0 ms input || 1 ms input || 4 ms input || 12 ms input
Supply Voltage Limits:
20.4-28.8 V
Product Certifications:
RCM || cULus || CE || UKCA || DNV-GL || ABS || LR
Clock Drift:
<= 60 s/month 25-25 °C
Battery Type:
BR2032 lithium non-rechargeable 4 year(s)
Reset Time:
10 ms automatic reset output || 12 s automatic reset fast output
Discrete Input Voltage Type:
DC
Sustainable Offer Status:
Green Premium product
Product Or Component Type:
logic controller
Execution Time For 1 Kinstruction:
0.3 ms event and periodic task || 0.7 ms other instruction
Discrete Output Type:
transistor
Discrete I/O Number:
24
Maximum Current Per Output Common:
2 A Q0...Q3 fast output || 2 A Q4...Q7 output || 1 A Q8...Q9 output
Realtime Clock:
with
Operating Altitude:
0...6561.68 ft (0...2000 m)
Maximum Leakage Current:
5 µA output
[Us] Rated Supply Voltage:
24 V DC
Surge Withstand:
1 kV power lines (DC) common mode IEC 61000-4-5 || 1 kV shielded cable common mode IEC 61000-4-5 || 0.5 kV power lines (DC) differential mode IEC 61000-4-5 || 1 kV relay output differential mode IEC 61000-4-5 || 1 kV input common mode IEC 61000-4-5 |
Mercury Free:
Yes
Resistance To Electromagnetic Fields:
10 V/m 80 MHz...1 GHz IEC 61000-4-3 || 3 V/m 1.4 GHz...2 GHz IEC 61000-4-3 || 1 V/m 2 GHz...3 GHz IEC 61000-4-3
Voltage State 0 Guaranteed:
<= 5 V input
Electromagnetic Emission:
conducted emissions 120...69 dBµV/m QP power lines)10-150 kHz IEC 55011 || conducted emissions 63 dBμV/m QP power lines)1.5-30 MHz IEC 55011 || radiated emissions 40 dBμV/m QP class A30-230 MHz IEC 55011 || conducted emissions 79...63 dBμV/m QP power
Maximum Tungsten Load:
<2.4 W
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Range Of Product:
Modicon M241
Discrete Output Logic:
negative logic (sink)
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Net Weight:
0.53 kg
Maximum Output Frequency:
20 kHz fast output (PWM mode) || 100 kHz fast output (PLS mode) || 1 kHz output
Discrete Output Voltage:
24 V DC transistor output
Resistance To Electrostatic Discharge:
8 kV in air IEC 61000-4-2 || 4 kV on contact IEC 61000-4-2
Discrete Input Current:
5 mA input || 10.7 mA fast input
Resistance To Fast Transients:
2 kV IEC 61000-4-4 power lines) || 1 kV IEC 61000-4-4 serial link) || 1 kV IEC 61000-4-4 input) || 1 kV IEC 61000-4-4 transistor output)
Data Storage Equipment:
<= 16 GB SD card optional)
  • Schneider Electric TM241C24U Controller M241-24Io Tr.Npn
  • Schneider Electric TM241C24U Controller M241-24Io Tr.Npn
$573.75

Description

controller M241 24 IO transistor NPN This product is part of the Modicon M241 range, an offer of plc controllers for performance demanding applications. This logic controller provides 14 discrete, 8 fast inputs, 10 transistor, 4 fast outputs with NPN transistor output. It is a Modicon logic controller with a rated supply/output voltage of 24V DC, an output current of 0.5A for transistor output, 0.1A for fast with sink or source input logic positive output logic. This product enables to build application intuitively as never before due to an organised screen design. Integrated connections are USB port with mini B USB 2.0 connector, non isolated serial link 1 with RJ45 connector and RS232/RS485 interface and non isolated serial link 2 with removable screw terminal block connector and RS485 interface. It is a Modicon M241 controller with 8MB for program, 64MB for system memory RAM, 128MB built-in flash memory for backup of user programs and a SD card memory capacity of 16GB. It is an IP20 rated product. Its dimensions are 150mm (Width) x 95mm (Depth) x 90mm (Height). It weighs 0.53kg. The Modicon M241 logic controllers are designed for high-performance compact machines incorporating speed and position control functions. This product is certified by CE, IACS E10, CSA, RCM and CULus. It meets ANSI/ISA 12-12-01, CSA C22.2 No 142, CSA C22.2 No 213, EN/IEC 61131-22007, marine specification (LR, ABS, DNV, GL), UL 1604 and UL 508 standards. The TM3 I/O bus port embedded on the Modicon M241 logic controllers allows the connection of Modicon TM3 expansion modules for local, remote and distributed I/O configurations, programmed with EcoStruxure Machine Expert software. It supports DIN rail mount.
View AllClose