Wago

WAGO 2003-6662

(No reviews yet) Write a Review
SKU:
2003-6662
MPN:
2003-6662
Condition:
New
actuation type:
Push-in || Operating tool
approvals per:
UL 1059
color:
Gray
connectable conductor materials:
Copper
connection technology:
Push-in CAGE CLAMP
country of origin sales organisation germany:
CN
depth from upper edge of din rail:
45.2 mm / 1.78 inch
design:
Angled
fine stranded conductor:
0.25 4 mm / 22 12 AWG
fine stranded conductor with ferrule push in termination:
1 2.5 mm / 18 14 AWG
fine stranded conductor with insulated ferrule:
0.25 2.5 mm / 22 14 AWG
fire load:
0.309 MJ
flammability class per ul94:
V0
height:
110 mm / 4.331 inch
insulation material:
Polyamide (PA66)
legend ratings:
(III / 3) Overvoltage category III / Pollution degree 3
marking level:
Center/side marking
mounting type:
DIN-35 rail
nominal cross section:
2.5 mm
nominal voltage iii 3:
250 V
note conductor cross section:
Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
note on rated current 1:
Maximum current depends on accessories used.
packaging type:
Box
rated current:
20 A
rated current 2:
25 A
rated current csa use group b:
20 A
rated current csa use group d:
15 A
rated current ul use group b:
6.3 A
rated current ul use group c:
6.3 A
rated current ul use group d:
6.3 A
rated surge voltage iii 3:
4 kV
rated surge voltage iii 3 2:
6 kV
rated voltage csa use group b:
300 V
rated voltage csa use group d:
150 V
rated voltage iii 3 2:
400 V
rated voltage ul use group b:
250 V
rated voltage ul use group c:
150 V
rated voltage ul use group d:
250 V
ratings note:
Potential ground
ratings note 2:
Potential potential
solid conductor:
0.25 4 mm / 22 12 AWG
solid conductor push in termination:
0.75 4 mm / 18 12 AWG
strip length:
10 12 mm / 0.39 0.47 inch
weight:
19.942 g
width:
5.2 mm / 0.205 inch
wiring direction:
Front-entry wiring
  • Wago 2003-6662
  • Wago 2003-6662
$8.46

Description

Multilevel installation terminal block; with operating slots; 2.5 mm²; Carrier terminal block without knife; L/L/PE; green-yellow lower deck; Push-in CAGE CLAMP; 2,50 mm²; gray.

The WAGO 2003 TOPJOB S series is a gray, multilevel installation feed-through and ground terminal block featuring three decks, pluggable disconnects, and side and center marking slots labeled "L/L/PE." It accommodates two feed-through poles and a protective earth (2P+PE) with five wires (2 push-in and 3 push-in) and supports a nominal cross-section of 2.5mm² for wire sizes ranging from 0.25mm² to 4mm² (#22AWG to #12AWG). The terminal block is rated for currents of 20A and 25A, utilizes Push-in CAGE CLAMP spring connections, and is designed for DIN-35 rail mounting with a width of 5.2mm, equivalent to model 20036662.

View AllClose