Description
Interface module for ETHERNET Y-ConJack-22
View AllClose
Electrical Data
- Operating voltage: nbsp;AC 35 V; nbsp;DC 50 V
- Nominal current: 2.1 A
- Insulation resistance: nbsp;500 M
- Specialty functions: Cross-over
Safety and protection:
- Dielectric strength contact-contact (AC, 1 min): 1 kV<sub>rms</sub>
Connection Data
- Connection type (1): System
- No. of poles: 10
- Pluggable connector: RJ-45 shielded; with two additional power jumper contacts
- Connection type (2): System
- No. of poles 2: 10
- Pluggable connector 2: RJ-45 shielded; with two additional power jumper contacts
- Mating cycles: 1000
- Max. transmission length: 100 m
- Connecting cable: min. Cat. 5
Geometrical Data
- Width: 30 mm / 1.181 inch
- Height from upper-edge of DIN-35 rail: 51 mm / 2.008 inch
- Depth: 85 mm / 3.346 inch
Mechanical Data
- Type of mounting: DIN-35 rail
- Housing design: Mounting carrier
Material Data
- Fire load: 0.000 MJ
- Weight: 34.300 g
Environmental Requirements
- Surrounding air (operating) temperature: -40 85 C
- Surrounding air (storage) temperature: -40 85 C
- Relative humidity: nbsp;85% (non condensing)
Commercial data
- Packaging type: BOX
- Country of origin: DE
- GTIN: 4045454326135
- Customs Tariff No.: 85369010000
The WAGO 289 series interface module features 2 cross-over power jumper contacts, a 10-pole configuration, and dual RJ45 8-pin system connectors. It supports a rated current of 2.1A and is designed for DIN-35 rail mounting with a 30mm width. The module operates within an ambient temperature range of -40°C to +85°C and is equivalent to model 289177.
