Wago

WAGO 750-438

SKU:

750-438

UPC:

MPN:

750-438

Condition:

New

conformity marking:

CE

connection technology inputs outputs:

8 x CAGE CLAMP

connection type 1:

Inputs/outputs

contact resistance max:

1000

country of origin sales organisation germany:

DE

current carrying capacity power jumper contacts:

0.0416666666666667

depth:

67.8 mm / 2.669 inch

depth from upper edge of din rail:

60.6 mm / 2.386 inch

emc emission of interference:

Per EN 61000-6-3, marine applications

emc immunity to interference:

Per EN 61000-6-2, marine applications

ex guideline:

EN IEC 60079-0, -7, -11

exposure to pollutants:

Per IEC 60068-2-42 and IEC 60068-2-43

fine stranded conductor:

0.08 2.5 mm / 28 14 AWG

fire load:

0.874 MJ

height:

100 mm / 3.937 inch

housing material:

Polycarbonate: polyamide 6.6

input characteristic:

High-side switching

input data width internal max:

2 bits

input filter digital:

3 ms

input pulse length:

5 ms

input pulse separation:

3 ms

intrinsic safety ex i:

Yes

isolation:

300 VAC system/field

marking:

ATEX/IECEx: II 3 (1) G Ex ec [ia Ga] IIC T4 Gc: II (1) D [Ex ia Da] IIIC: I (M1) [Ex ia Ma] I

mounting position:

Horizontal (standing/lying): vertical

mounting type:

DIN-35 rail

note:

The digital input module must only be operated with a 24 VDC Ex i power supply!General information (e.g., installation regulations) on explosion protection is available in the WAGO I/O System 750 manuals!

number of digital inputs:

2

number of incoming power jumper contacts:

2

number of outgoing power jumper contacts:

2

open circuit voltage:

8.2 V

operating altitude:

0 2000 m

packaging type:

Box

permissible h2s contaminant concentration at a relative humidity 75:

10 ppm

permissible so2 contaminant concentration at a relative humidity 75:

25 ppm

pollution degree 5:

2 per IEC 61131-2

power consumption 5 v system supply:

2.5 mA

power consumption field supply module with no external load:

16 mA

power consumption pmax:

0.4 W

power loss pl:

0.27 W

protection type:

IP20

reactances ex ia i:

Lo = 1 H: Co = 38 F

reactances ex ia iia:

Lo = 1 H: Co = 36 F

reactances ex ia iib:

Lo = 600 mH: Co = 9 F

reactances ex ia iic:

Lo = 190 mH: Co = 1.4 F

reactances note:

Reactances without accounting for the concurrence of L and C

relative humidity without condensation:

0.95

safety relevant data circuit:

Uo = 12 V: Io = 13.5 mA: Po = 40.5 mW: Linear characteristic curve

sensor connection:

2 x (2-wire)

shock resistance:

15g per IEC 60068-2-27

short circuit current:

¤ 8.2 mA

signal current 0 namur:

1.2 mA

signal current 1 namur:

2.1 mA

signal type:

NAMUR

solid conductor:

0.08 2.5 mm / 28 14 AWG

strip length:

8 9 mm / 0.31 0.35 inch

supply voltage field:

24 VDC: (Ex i power supply: UO = max. 27.3 V): via power jumper contacts (power supply via blade contact: transmission via spring contact)

supply voltage sensor:

8.2 VDC: Short-circuit-protected, isolated channels

supply voltage system:

5 VDC: via data contacts

surrounding air temperature operation:

0 55 C

surrounding air temperature storage:

-40 85 C

switching hysteresis:

0.2 mA

total number of channels module:

2

vibration resistance:

4g per IEC 60068-2-6

weight:

44.100 g

width:

12 mm / 0.472 inch