WAGO 787-1200

(No reviews yet) Write a Review

Write a Review

WAGO 787-1200

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

787-1200

UPC:

MPN:

Condition:

New

conformity marking:

CE

connection technology:

Push-in CAGE CLAMP

connection technology 2:

Push-in CAGE CLAMP

connection type 1:

Input

connection type 2:

Output

control deviation:

¤ 1 %

country of origin sales organisation germany:

CN

depth:

55 mm / 2.165 inch

depth from upper edge of din rail:

52.5 mm / 2.067 inch

derating:

-2.6 %/K (> 55 C)

deviation dynamic load change 10 90:

¤ 1 %

discharge current:

¤ 0.25 mA

efficiency typ:

83 % (230 VAC: Nominal load): 82 % (110 VAC: Nominal load)

fine stranded conductor:

0.2 2.5 mm / 24 12 AWG

fine stranded conductor 2:

0.2 1.5 mm / 24 14 AWG

fire load:

0.072 MJ

flammability class per ul94:

V2

height:

90 mm / 3.543 inch

input current ii:

¤ 0.27 A (100 VAC: 0.5 ADC)

input voltage derating:

-2 %/V (< 100 VAC)

input voltage range:

AC 90 264 V

inrush current:

¤ 30 A (NTC)

internal fuse:

T 1 A / 250 VAC

isolation voltage pri sec:

DC 4.242 kV

mains failure hold up time:

100 ms (230 VAC)

mounting type:

DIN-35 rail || Screw mount (back/side)

mtbf:

> 700,000 h (per IEC 61709)

nominal input voltage ui nom:

1 x AC 100 240 V

nominal mains frequency range:

47 63 Hz

nominal output current io nom:

0.5 A

nominal output power:

12 W

nominal output voltage uo nom:

DC 24 V (SELV)

open circuit proof:

Yes

operation status indicator:

Green LED (Uo)

overload behavior:

Shutdown and automatic restart in the event of a short circuit

overvoltage category:

II

overvoltage protection secondary:

¤ 31 VDC (in the event of a fault)

packaging type:

Box

parallel operation:

No

phases:

1

pollution degree:

2

power factor:

0.5

power factor correction pfc:

None

power loss max pl max:

2.5 W (100 VAC / 24 VDC: 0.5 A)

power loss pl:

¤ 0.2 W (230 VAC: No load)

protection class:

II

protection type:

IP20 (per EN 60529)

recommended backup fusing:

Circuit breaker: 6 A (C characteristic), 10 A (B characteristic) or higher

relative humidity:

20 90 % (no condensation permissible)

required backup fusing:

An external DC fuse is required for the DC input voltage.

residual ripple:

¤ 100 mV (Peak-to-peak)

resistance to reverse feed:

¤ DC 31 V

reverse voltage protection:

Yes

series operation:

Yes, for 2 devices of the same type

short circuit protected:

Yes

signaling:

1 x Status indication LED (green)

solid conductor:

0.2 2.5 mm / 24 12 AWG

solid conductor 2:

0.2 1.5 mm / 24 14 AWG

standards specifications:

EN 61204-3 || EN 60335-1 || EN 62368 || UL 62368 || UL 508

strip length:

9 10 mm / 0.35 0.39 inch

strip length 2:

8 9 mm / 0.31 0.35 inch

surrounding air temperature operation:

-25 70 C

surrounding air temperature storage:

-40 85 C

transient suppression primary:

Yes

wago connector:

picoMAX 5.0, WAGO 2092 Series

wago connector 2:

picoMAX 3.5 (WAGO 2091 Series)

weight:

63.000 g

width:

18 mm / 0.7 inch