Power supply; Compact; 1-phase; 24 VDC output voltage; 1.25 A output current.
The compact switch-mode AC/DC power supply unit (SMPS PSU) by WAGO, part of the Compact series, is DNV approved and provides a 24Vdc (SELV) output at 1.25A and 30W. It accepts an input voltage range of 100-264Vac, suitable for various single-phase AC inputs (110Vac, 120Vac, 220Vac, 230Vac, 240Vac). The unit features Push-in CAGE CLAMP spring connections and is designed for DIN-35 rail mounting with a width of 36mm. It has an IP20 protection rating and operates in ambient temperatures ranging from -25°C to +70°C, equivalent to model 7872850.
- conformity marking:
- CE
- connection technology:
- Push-in CAGE CLAMP
- connection technology 2:
- Push-in CAGE CLAMP
- connection type 1:
- Input
- connection type 2:
- Output
- control deviation:
- ¤ 2 %
- country of origin sales organisation germany:
- DE
- depth:
- 62 mm / 2.441 inch
- depth from upper edge of din rail:
- 55 mm / 2.165 inch
- derating:
- -1.7 %/K (> 55 C)
- efficiency typ:
- 0.88
- fine stranded conductor:
- 0.25 2.5 mm / 22 12 AWG
- fine stranded conductor 2:
- 0.2 1.5 mm / 24 16 AWG
- fire load:
- 0.045 MJ
- flammability class per ul94:
- V0
- height:
- 90 mm / 3.543 inch
- input current ii:
- ¤ 0.55 A (110 VAC): ¤ 0.33 A (240 VAC)
- input voltage range:
- AC 100 264 V
- inrush current:
- ¤ 24 A (NTC)
- internal fuse:
- T 1.25 A / 250 VAC
- isolation voltage pri sec ac:
- 2470 V
- isolation voltage sec gnd:
- DC 0.5 kV
- mains failure hold up time:
- 95 ms (230 VAC)
- mounting type:
- DIN-35 rail
- mtbf:
- > 2,500,000 h (per EN/IEC 61709 at +40 C)
- nominal input voltage ui nom:
- 1 x AC 110 240 V
- nominal mains frequency range:
- 47 63 Hz
- nominal output current io nom:
- 1.25 A (24 VDC)
- nominal output power:
- 30 W
- nominal output voltage uo nom:
- DC 24 V (SELV)
- open circuit proof:
- Yes
- operation status indicator:
- Green LED (Uo)
- output voltage range:
- DC 24 24 V (fixed setting)
- overload behavior:
- Hiccup
- overvoltage category:
- III
- overvoltage protection secondary:
- ¤ 32 VDC (in the event of a fault)
- packaging type:
- Box
- parallel operation:
- Yes
- phases:
- 1
- pollution degree:
- 2
- power loss max pl max:
- 5 W (110 VAC / 24 VDC: 1.35 A)
- power loss pl:
- ¤ 0.5 W (230 VAC: No load): ¤ 4 W (230 VAC: Nominal load)
- protection class:
- I
- protection type:
- IP20 (per EN 60529)
- recommended backup fusing:
- 16 A (for USA/Canada: 15 A)
- relative humidity:
- 5 96 % (no condensation permissible)
- residual ripple:
- ¤ 60 mV (Peak-to-peak)
- resistance to reverse feed:
- ¤ DC 32 V
- series operation:
- Yes
- short circuit protected:
- Yes
- signaling:
- 1 x Status indication LED (green)
- solid conductor:
- 0.25 2.5 mm / 20 12 AWG
- solid conductor 2:
- 0.2 1.5 mm / 24 16 AWG
- standards specifications:
- EN 61204-3 || EN 61010-1 || EN 61010-2-201 || CULus 61010-1 || CULus 61010-2-201 || DNV GL
- strip length:
- 10 11 mm / 0.39 0.43 inch
- strip length 2:
- 9 10 mm / 0.35 0.39 inch
- surrounding air temperature operation:
- -20 70 C (Nominal mounting position: 20 +55 C (in any mounting position))
- surrounding air temperature storage:
- -40 85 C
- wago connector:
- WAGO 804 Series
- wago connector 2:
- WAGO 805 Series
- weight:
- 120.000 g
- width:
- 36 mm / 1.417 inch
