Wago

WAGO 859-735 Pack of 10

(No reviews yet) Write a Review
SKU:
859-735
MPN:
859-735
Condition:
New
circuit type:
3-wire connection || High-side switching
connection technology:
CAGE CLAMP«
country of origin sales organisation germany:
DE
depth from upper edge of din rail:
56 mm / 2.205 inch
dielectric strength control load circuit ac 1 min:
2.5 kVrms
fine stranded conductor:
0.08 ƒƒ‡ª 2.5 mm / 28 ƒƒ‡ª 14 AWG
fire load:
0.313 MJ
height:
91 mm / 3.583 inch
input voltage range high level:
DC 5.5 ƒƒ‡ª 7 V
input voltage range low level:
DC 0 ƒƒ‡ª 5 V
insulation type adjacent devices:
Reinforced insulation (safe isolation)
insulation type control load circuit:
Basic insulation
leakage current at rated voltage:
ƒƒ«ƒƒ± 10 A
limiting continuous current:
0.25 A
mounting type:
DIN-35 rail
nominal input voltage un:
DC 24 V
nominal output voltage:
DC 24 V
note:
Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks.
operating altitude max:
2000 m
output voltage range:
DC 20 ƒƒ‡ª 30 V
overvoltage category:
II
packaging type:
Box
pollution degree:
2
processing temperature:
-25 ƒƒ‡ª +50 C
rated voltage:
300 V
relative humidity:
5 ƒƒ‡ª 95 % (no condensation permissible)
solid conductor:
0.08 ƒƒ‡ª 2.5 mm / 28 ƒƒ‡ª 14 AWG
standards specifications:
EN 61000-6-2 || EN 61000-6-3 || EN 61010-2-201
status indicator:
Red LED
strip length:
5 ƒƒ‡ª 6 mm / 0.2 ƒƒ‡ª 0.24 inch
surrounding air temperature operation at un:
-25 ƒƒ‡ª 70 C
surrounding air temperature storage:
-40 ƒƒ‡ª 70 C
switching frequency:
ƒƒ«ƒƒ± 10 kHz
turn off time:
ƒƒ«ƒƒ± 30 s
turn on time:
ƒƒ«ƒƒ± 20 s
voltage drop at output max:
ƒƒ«ƒƒ± DC 1.2 V
weight:
18.899 g
width:
6 mm / 0.236 inch
  • Wago 859-735 OPTO, DC 24V
  • Wago 859-735 OPTO, DC 24V
  • Wago 859-735 OPTO, DC 24V
$456.80

Description

Optocoupler module; Nominal input voltage: 24 VDC; Output voltage range: 20 … 30 VDC; Limiting continuous current: 0.25A; 3-wire connection/high-side switching; Railway; Frequency: 10 kHz; Red status indicator; Module width: 6 mm.

The WAGO 859 series fixed-type solid-state relay (SSR) features a red LED, 3-wire connection, and high-side switching, designed for railway applications. It is a single-pole, single-phase relay with a control voltage range of 15-30Vdc (24Vdc nominal) and an output rated voltage of 3Vdc-30Vdc (24Vdc nominal). The relay supports a continuous rated current of 1.5A and utilizes CAGE CLAMP connections for secure wiring. It is designed for DIN-35 rail mounting with a 6mm width and is equivalent to model 859735.

View AllClose