Schneider Electric 831VS-120A Voltage sensor relay, SE Relays, SPDT, 15A, 120 VAC, 0 to 10 s, 1 time scale, 25-150 VAC, DIN mounting
Schneider Electric
$149.30
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric 831VS-120A Voltage sensor relay, SE Relays, SPDT, 15A, 120 VAC, 0 to 10 s, 1 time scale, 25-150 VAC, DIN mounting
The SE Relays 831 series voltage sensor, single-phase AC voltage sensing device is designed to be wired across terminals A1 and A2 with the voltage being monitored. Voltage sencor is capable of monitoring and reacting to overvoltage and undervoltage conditions. The Umax dial is used to set the upper trip-point of 85VAC to 150VAC for the voltage sensor. The Umin dial is a 30–99% of upper preset of the Umax dial and is used to set the lower trip-point for the voltage sensor. Relay has SPDT silver alloy contacts, rated 15A at 12VAC. The timing dial is used to delay the transfer of the contacts, from 0s to 10s, when a set point has been violated. Three-state indication LEDs indicates normal state by green LED and two types of faulted states by blinking red LED as timing state and steady on red LED as energized relay. Direct mount on a 35mm DIN rail, narrow width 17.5mm makes this relay ideal for tight spaces.
- [Ie] Rated Operational Current:
- 15 A at 240 V AC-1
- Breaking Capacity:
- 4000 VA AC-1
- Product Or Component Type:
- relay
- Net Weight:
- 73 g
- Hysteresis:
- 2-6 % adjustable from fault to OK state overvoltage or undervoltage detection
- Electrical Durability:
- 30000 cycles
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Weight:
- 73 g
- Rohs Exemption Information:
- Yes
- Tightening Torque:
- 0.8-0.8 N.m
- Reach Free Of Svhc:
- Yes
- Nominal Output Current:
- 15 A
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Maximum Switching Voltage:
- 250 V
- Repeat Accuracy:
- +/- 1 %
- Time Delay Range:
- 0...10 s
- Country of Origin:
- United States
- Switch Function:
- SPDT
- Local Signaling:
- 1 LED red || 1 LED green
- Contacts Material:
- AgNi
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
- Awg Gauge:
- AWG 14
- Mercury Free:
- Yes
- Control Type:
- with adjustment knob front
- Time Delay Type:
- adjustable
- Power Consumption In Va:
- 1.2 VA 120 V
- Temperature Drift:
- < 0.1 %/°C
- Mounting Support:
- 35 mm DIN rail conforming to IEC 60715
- Standards:
- IEC 61010-1 || EN 60255-26 || EN 60255-27
- Ambient Air Temperature For Storage:
- -30-70°C
- Tripping Threshold:
- 85...150 V || 30...99 % of Us
- Product Certifications:
- CE || UL || WEEE || RoHS
- Ip Degree Of Protection:
- IP20 IEC 60529 terminals) || IP40 IEC 60529 front panel)
- Mechanical Durability:
- 15000000 cycles
- Ambient Air Temperature For Operation:
- -20-55°C
- [Us] Rated Supply Voltage:
- 85...150 V AC 50...60 Hz
- Toxic Heavy Metal Free:
- Yes
- Minimum Switching Current:
- 100 mA 5 V
- Voltage Range:
- 25...150 V
- Depth:
- 64 mm
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Overvoltage Category:
- III IEC 60664-1
- Range Of Product:
- Legacy
- Dielectric Strength:
- 4000 V between input and output
- Sensor Type:
- voltage sensor
- China Rohs Regulation:
- X
