Schneider Electric

Schneider Electric LTMEV40FM Extension module, TeSys T, 4 inputs, 100 to 240VAC, for LTMR controller

(No reviews yet) Write a Review
SKU:
LTMEV40FM
MPN:
LTMEV40FM
Condition:
New
Measurement Accuracy:
1 % voltage 100...830 V) || 3 % power factor || 5 % active and reactive power
Country of Origin:
China
[Uimp] Rated Impulse Withstand Voltage:
4 kV supply, inputs and outputs EN/IEC 60947-4-1 || 6 kV current or voltage measurement circuit EN/IEC 60947-4-1
Ambient Air Temperature For Storage:
-40-80°C
Input Current:
3.1 mA 100 V || 7.5 mA 240 V
Weight:
0.21 kg
Device Short Name:
LTME
Protective Treatment:
12 x 24 hour cycles EN/IEC 60068-2-30 || 48 h EN/IEC 60070-2-11 || TH EN/IEC 60068
Product Certifications:
LROS (Lloyds register of shipping) || ATEX || NOM || EAC || RMRoS || GL || UL || DNV || BV || RINA || KERI || C-tick || CSA || CCC || ABS
Current State 0 Guaranteed:
logic input 0...40 V 2...15 mA 25 ms
Supply:
via the controller
Logic Input Number:
4
Net Weight:
0.21 kg
Rohs Exemption Information:
Yes
Connections - Terminals:
control circuit connector 1 0.25-2.5 mm² AWG 24...AWG 14)flexible with cable end || control circuit connector 1 0.2-2.5 mm² AWG 24...AWG 14)flexible without cable end || control circuit connector 1 0.25-2.5 mm² AWG 24...AWG 14)flexible without cab
Pvc Free:
Yes
Sustainable Offer Status:
Green Premium product
[Ui] Rated Insulation Voltage:
690 V EN/IEC 60947-1 || 690 V CSA C22.2 No 14 || 690 V UL 508
Pollution Degree:
3
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Depth:
120.7 mm
Halogen Content Performance:
Halogen free plastic parts product
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Circularity Profile:
ENVEOLI100411EN_V2
Operating Altitude:
<= 6561.68 ft (2000 m) without derating
Ambient Air Temperature For Operation:
-20-60°C
Warranty:
18 months
Tightening Torque:
control circuit 0.5-0.6 N.m flat 3 mm
Overvoltage Category:
III
Product Or Component Type:
extension module
Device Application:
equipment monitoring and control
Electromagnetic Compatibility:
electrostatic discharge, 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2 || fast transients immunity test (other circuits), level 3, 2 kV, conforming to EN/IEC 61000-4-4 || fast transients immunity test (on supply and relay outputs), level
Compatibility Code:
LTME
Standards:
CSA C22.2 No 14 || IACS E10 || IEC 60947-4-1 || UL 508 || EN 60947-4-1
Ip Degree Of Protection:
IP20
Mechanical Robustness:
shocks half sine wave acceleration15 Gn for 11 ms EN/IEC 60068-2-27 || vibrations mounted on symmetrical rail1 Gn, 5...300 Hz EN/IEC 60068-2-6 || vibrations plate mounted4 Gn, 5...300 Hz EN/IEC 60068-2-6
Metering Type:
imbalance voltage || active power P, P1, P2, P3 || calculated active and reactive energy (+/- W.h, +/- VAR.h) || voltage U21, U32, U13, V1, V2, V3 || reactive power Q, Q1, Q2, Q3 || frequency || power factor
Mercury Free:
Yes
Eu Rohs Directive:
Compliant with Exemptions
Maximum Operating Rate:
1800 cyc/h
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Contacts Type And Composition:
without
Range:
TeSys
Maximum Operating Frequency:
2 Hz
Product Name:
TeSys T
Fire Resistance:
650°C EN/IEC 60695-2-12 || 960°C UL 94
$300.00

Description

TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. TeSys T manages most critical processes while reducing downtime and increasing productivity. TeSys T is a flexible system that integrates seamlessly into your automation system through five major communication protocols. TeSys T predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. TeSys T has a number of components that increase the flexibility of the system. This expansion module adds functionalities to the TeSys T controller. It adds voltage mesurement between phases up to 690 V nominal and 4 additional inputs. Module has 4 discrete logic inputs. 120 to 240 VAC is used to power the module. Module has the following certifications: UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC.
View AllClose