Schneider Electric

Schneider Electric LXM28EU45M3X Lexium28 EtherCAT drive, 4.5kW, 3 phase 230V

SKU:

LXM28EU45M3X

UPC:

MPN:

LXM28EU45M3X

Condition:

New

Supply Voltage Limits:

200-255 V three phase || 170-255 V single phase

Ambient Air Temperature For Operation:

0-55°C

Network Frequency:

47.5...63 Hz

Supply Frequency:

50/60 Hz - 5...5 %

Product Certifications:

cULus || CE || CSA

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Type Of Cable:

shielded motor cable 0-55°C) copper

Rohs Exemption Information:

Yes

Range Of Product:

Lexium 28

Output Current 3S Peak 3:

61 A 220 V

Weight:

3.2 kg

Physical Interface:

RS485 Modbus Serial line slave

Electrical Connection:

spring terminal 6 mm², AWG 10 L1-L2) || spring terminal 6 mm², AWG 10 R, S, T) || spring terminal 6 mm², AWG 10 U, V, W, PE) || spring terminal 6 mm², AWG 10 PA/+, PBe)

Shock Resistance:

10 gn, type I IEC 60721-3-3

Net Weight:

3.2 kg

Emc Filter:

without EMC filter

Product Or Component Type:

motion servo drive

Ambient Air Temperature For Storage:

-25-65°C

Product Compatibility:

servo motor BCH2 180 mm, 3 4500 W || servo motor 180 mm, 2 3500 W

Status Led:

1 LED (Red) DC bus energized || 1 LED (multi-colour) N.RUN || 1 LED (multi-colour) N.ERR || 2 LEDs (Yellow) Link (Link Status) || 2 LEDs (Yellow) activity

Discrete Output Logic:

positive or negative CN1)

Discrete Input Logic:

positive or negative CN1)

Overvoltage Category:

III

Environmental Disclosure:

ENVPEP1409001EN

Reach Free Of Svhc:

Yes

Signaling Function:

servo status and fault codes five 7-segment display units

Discrete Output Number:

5 logic output CN1)12...24 V DC || 1 pulse train output (PTO) CN1)

Line Current:

17.9 A 147.1 % 220 V, three phase

Device Short Name:

LXM28E

Electrical Isolation:

between power and control

Transmission Rate:

100 Mbit/s EtherCAT

Continuous Power:

4500 W 220 V

Connector Type:

RJ45 CN4)EtherCAT

Ip Degree Of Protection:

IP20

Safety Function:

STO (safe torque off), Integrated

Protection Type:

against reverse polarity inputs signal || against short-circuits outputs signal || overcurrent motor || overvoltage motor || undervoltage motor || overheating motor || overload motor || overspeed motor

Discrete Output Voltage:

12...24 V DC

Output Current 3S Peak:

61 A 220 V

Operating Altitude:

<= 3280.84 ft (1000 m) without derating || > 3280.84...6561.68 ft (> 1000...2000 m) 1 % per 100 m

Discrete Input Voltage:

24 V DC logic

Operating Position:

vertical

Standards:

IEC 61800-5-1

Country of Origin:

China

Electromagnetic Compatibility:

conducted emission - test level: level 3 category C3 conforming to IEC 61800-3

Phase:

three phase

Marking:

CSA || CE || cULus