Schneider Electric SH31002P02F2200 servo motor SH3 100 5,8Nm,nokey,multi,brake,90°conn.IP65/IP67,6k RPM
SKU:
SH31002P02F2200
UPC:
MPN:
SH31002P02F2200
Condition:
New
Shaft Diameter:
19 mm
Warranty:
18 months
Country of Origin:
United States
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Type Of Cooling:
natural convection
Product Or Component Type:
servo motor
Net Weight:
6.3 kg
Circularity Profile:
N/A
Continuous Stall Current:
4.8 A
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Encoder Type:
absolute multiturn SinCos Hiperface
Continuous Stall Torque:
5.8 N.m 115...480 V three phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Mounting Holes Diameter:
9.0 mm
Mounting Support:
international standard flange
Maximum Mechanical Speed:
6000 rpm
[Us] Rated Supply Voltage:
115...480 V
Circle Diameter Of The Mounting Holes:
115 mm
Back Emf Constant:
77 V/krpm 20°C
Weight:
6.3 kg
Peak Stall Torque:
18.3 N.m 115...480 V three phase
Rohs Exemption Information:
Yes
Nominal Speed:
1000 rpm 115 V single phase || 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
Holding Torque:
9 N.m
Range Compatibility:
PacDrive 3
Device Short Name:
SH3.....P
Mercury Free:
Yes
Environmental Disclosure:
ENVPEP111049EN
Torque Constant:
1.21 N.m/A 120°C
Ip Degree Of Protection:
IP65 motor: conforming to IEC 60034-5 || IP65 shaft bushing: conforming to IEC 60034-5 || IP67 housing: conforming to IEC 60034-5
Sustainable Offer Status:
Green Premium product
Stator Inductance:
19.5 mH
Nominal Torque:
5.5 N.m 115 V single phase || 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
Shaft Length:
40 mm
Continuous Power:
1900 W
Electrical Connection:
straight connector
Centring Collar Depth:
3.5 mm
Holding Brake:
with
Shaft End:
smooth shaft
Centring Collar Diameter:
95 mm
Rotor Inertia:
2.928 kg.cm²
Number Of Motor Poles:
4
Maximum Axial Force Fa:
160 N
Speed Feedback Resolution:
128 periods
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 4-pole servo motor features maximum mechanical speed of 6000RPM and smooth shaft end with...
