Baumer FEDM 08P1001/S35L 10236650
Baumer
$405.50
The Baumer FEDM 08P1001/S35L 10236650 is a through beam sensor designed for precise object detection with a receiver function. It features an actual range of 0.7 m and a nominal range of 1 m. The sensor is equipped with a flashing light indicator for alignment or soiled lens notification and uses a red LED light indicator. It operates without sensitivity adjustment and has a quick response time of less than 2.5 ms. The sensor is powered by a voltage supply range of 10 to 30 VDC, with a typical current consumption of 24 mA and a voltage drop of less than 2 VDC. It supports a light operate output function with a PNP output circuit and can handle an output current of up to 100 mA. Safety features include short circuit and reverse polarity protection. The sensor's compact design measures 8 mm in width, 58 mm in height, and 12 mm in depth, with a rectangular, anodized aluminum housing and a PC front optics. It connects via a 3-pin M8 connector and operates within a temperature range of -25 to +65 °C. The sensor is IP 65 rated, indicating a high level of protection against dust and water.
- Type:
- Through beam sensor
- Emitter / receiver:
- Receiver
- Actual range Sb:
- 0.7 m
- Nominal range Sn:
- 1 m
- Alignment / soiled lens indicator:
- Flashing light indicator
- Light indicator:
- LED red
- Sensitivity adjustment:
- No
- Response time / release time:
- < 2.5 ms
- Voltage supply range +Vs:
- 10 30 VDC
- Current consumption max. (no load):
- 24 mA
- Current consumption typ.:
- 24 mA
- Voltage drop Vd:
- <2 VDC
- Output function:
- Light operate
- Output circuit:
- PNP
- Output current:
- 100 mA
- Short circuit protection:
- Yes
- Reverse polarity protection:
- Yes
- Width / diameter:
- 8 mm
- Height / length:
- 58 mm
- Depth:
- 12 mm
- Design:
- Rectangular
- Housing material:
- Aluminum anodized
- Front (optics):
- PC
- Connection types:
- Connector M8, 3 pin
- Operating temperature:
- -25 +65 °C
- Protection class:
- IP 65
- Datasheet:
- View
