Baumer FEDM 12P5101 10234248 is a through beam sensor designed as a receiver with an actual range of 6 m and a nominal range of 7.5 m. It features a flashing light indicator for alignment or soiled lens detection and a yellow LED light indicator. This model does not allow for sensitivity adjustment and boasts a rapid response and release time of less than 1 ms. It operates on a voltage supply range of 10 to 30 VDC, with a typical and maximum current consumption of 17 mA and a voltage drop of less than 1.8 VDC. The output functions include light and dark operate, with a PNP output circuit and a maximum output current of 100 mA. It includes safety features such as short circuit and reverse polarity protection. The sensor measures 12.4 mm in width, 35 mm in height and depth, and is housed in a rectangular, die-cast zinc body with a PMMA front optics. It connects via a 4-pin, 2 m cable and operates within a temperature range of -25 to +65 °C. The sensor is IP 67 rated, indicating a high level of protection against dust and water ingress.
- Type:
- Through beam sensor
- Emitter / receiver:
- Receiver
- Actual range Sb:
- 6 m
- Nominal range Sn:
- 7.5 m
- Alignment / soiled lens indicator:
- Flashing light indicator
- Light indicator:
- LED yellow
- Sensitivity adjustment:
- No
- Response time / release time:
- < 1 ms
- Voltage supply range +Vs:
- 10 30 VDC
- Current consumption max. (no load):
- 17 mA
- Current consumption typ.:
- 17 mA
- Voltage drop Vd:
- <1.8 VDC
- Output function:
- Light / dark operate
- Output circuit:
- PNP
- Output current:
- 100 mA
- Short circuit protection:
- Yes
- Reverse polarity protection:
- Yes
- Width / diameter:
- 12.4 mm
- Height / length:
- 35 mm
- Depth:
- 35 mm
- Design:
- Rectangular
- Housing material:
- Die-cast zinc
- Front (optics):
- PMMA
- Connection types:
- Cable 4 pin, 2 m
- Operating temperature:
- -25 +65 °C
- Protection class:
- IP 67
- Datasheet:
- View
