Baumer FFAM 17PTD1002/L 10125918 is a liquid level sensor equipped with a pulsed infrared diode light source and operates at a nominal pressure of 40 bar at the probe tip. It features a yellow LED output indicator and sensitivity can be adjusted via a 15-turn potentiometer. The sensor has a wavelength of 880 nm and makes contact with the medium for measurement. It requires a voltage supply range of 10 to 30 VDC, with a maximum current consumption of 15 mA when unloaded and a voltage drop of less than 2 VDC. The output function is normally open (NO) with a PNP output circuit and can handle an output current of 200 mA. It lacks short circuit protection but includes reverse polarity protection from Vs to GND. The sensor has a cylindrical design with dimensions of 30 mm in width/diameter and 66.5 mm in height/length, featuring a G 3/8" thread. The sensing device is made of borosilicate glass, and the housing is constructed from stainless steel DIN 1.4305/AISI 303. It connects via a 3-pin, 2-meter cable and operates within a temperature range of 0 to +65 °C. The sensor is rated at protection class IP 67.
- Type:
- Liquid level sensor
- Light source:
- Pulsed infrared diode
- Nominal pressure (probe tip):
- 40 bar
- Output indicator:
- LED yellow
- Sensitivity adjustment:
- Potentiometer, 15 turn
- Wave length:
- 880 nm
- Measurement type:
- Contact with medium
- Voltage supply range +Vs:
- 10 30 VDC
- Current consumption max. (no load):
- 15 mA
- Voltage drop Vd:
- <2 VDC
- Output function:
- Normally open (NO)
- Output circuit:
- PNP
- Output current:
- 200 mA
- Short circuit protection:
- No
- Reverse polarity protection:
- Yes, Vs to GND
- Width / diameter:
- 30 mm
- Height / length:
- 66.5 mm
- Thread:
- G 3/8"
- Design:
- Cylindrical
- Material (sensing device):
- Glass (borosilicate)
- Housing material:
- Stainless steel DIN 1.4305/AISI 303
- Connection types:
- Cable 3 pin, 2 m
- Operating temperature:
- 0 +65 °C
- Protection class:
- IP 67
- Datasheet:
- View
