The Baumer IF200.D10L-Q41.UAMT.71N is a non-flush, linearized distance measuring sensor with a measuring range of 0 to 10 mm and a high resolution of less than 0.02 mm. It features repeat accuracy of 0.02 mm and a linearity error of ± 50 µm. The sensor is equipped with qTeach for easy adjustment, and offers both single point and window teaching options. It has a fast response time of less than 2.3 ms and a switching frequency of 150 Hz. Operating on a voltage supply range of 12 to 30 VDC, it consumes a maximum of 25 mA with no load. The output is PNP analog 0 to 10 VDC, supporting a load resistance of over 10 kOhm and an output current of 100 mA. It includes short circuit and reverse polarity protection. The sensor's rectangular housing is made of SAN, measuring 20 mm in width and 41 mm in length, and connects via an M8 connector. It operates within a temperature range of -25 to +75 °C and is IP 67 rated for protection against dust and water ingress.
- Mounting type:
- Non-flush
- Special type:
- Linearized
- Type:
- Distance measuring
- Measuring distance Sd:
- 0 10 mm
- Resolution:
- < 0.02 mm (stat.)
- Repeat accuracy:
- 0.02 mm
- Adjustment:
- qTeach
- Teach:
- Single point, Window
- Linearity error:
- ± 50 µm
- Temperature drift:
- ± 2 % (Full Scale)
- Power on indication:
- LED green
- Output indicator:
- LED yellow
- Response time (factory characteristic):
- < 2.3 ms
- Switching frequency:
- 150 Hz
- Voltage supply range +Vs:
- 12 30 VDC
- Current consumption max. (no load):
- 25 mA
- Output circuit:
- PNP Analog 0 ... 10 VDC
- Load resistance:
- > 10 kOhm
- Output current:
- 100 mA
- Voltage drop Vd:
- <2.5 VDC
- Short circuit protection:
- Yes
- Reverse polarity protection:
- Yes
- Design:
- Rectangular
- Material (sensing face):
- SAN
- Housing material:
- SAN
- Dimension:
- 20 mm
- Housing length:
- 41 mm
- Connection types:
- Connector M8
- Operating temperature:
- -25 +75 °C
- Protection class:
- IP 67
- Datasheet:
- View
- Operating Manual:
- View
