Baumer OR18.EI-PW1P.71O 11157811 is a through beam sensor designed as a receiver with an actual range of 13 m and a nominal range of 20 m. It features alignment and soiled lens indicators through a green LED, and an output status is shown by a yellow LED. The sensitivity can be adjusted using a 270° potentiometer. This sensor has a quick response and release time of less than 2 ms. It operates on a voltage supply range of 12 to 30 VDC, with a typical current consumption of 30 mA and a maximum of 40 mA. The output function can be set to light or dark operate, and it includes a PNP output circuit with a maximum output current of 100 mA. It offers short circuit and reverse polarity protection. The sensor has a cylindrical threaded design, measuring 18 mm in width and 67.2 mm in length, and is made from ABS TERLURAN plastic with a PMMA front optics. It connects via an M12 4-pin connector and operates within a temperature range of -25 to +55 °C. The sensor is IP 67 rated, indicating a high level of protection against dust and water ingress.
- Type:
- Through beam sensor
- Emitter / receiver:
- Receiver
- Actual range Sb:
- 13 m
- Nominal range Sn:
- 20 m
- Alignment / soiled lens indicator:
- LED green
- Output indicator:
- LED yellow
- Sensitivity adjustment:
- Potentiometer, 270°
- Response time / release time:
- < 2 ms
- Voltage supply range +Vs:
- 12 30 VDC
- Current consumption max. (no load):
- 40 mA
- Current consumption typ.:
- 30 mA
- Voltage drop Vd:
- <2 VDC
- Output function:
- Light / dark operate
- Output circuit:
- PNP
- Output current:
- 100 mA
- Short circuit protection:
- Yes
- Reverse polarity protection:
- Yes
- Width / diameter:
- 18 mm
- Height / length:
- 67.2 mm
- Design:
- Cylindrical threaded
- Housing material:
- Plastic (ABS TERLURAN)
- Front (optics):
- PMMA
- Connection types:
- Connector M12 4 pin
- Operating temperature:
- -25 +55 °C
- Protection class:
- IP 67
- Datasheet:
- View
