The Baumer OXE7.E25T-LB3E.SIMD.7AI is a high-precision optical measuring device from the PosCon OXE7 series, designed for detecting edges, center, width, and gaps. It offers a measuring range of 75 to 125 mm in width and 150 to 250 mm in distance, with a frequency range of 125 to 500 Hz. The device boasts a resolution of 30 to 50 µm and repeat accuracy of ±10 µm. It can detect object widths as small as 1.5 mm, gaps of 2 mm, and steps of 2 mm, with a linearity error of ±80 to 120 µm. The temperature drift is less than 0.05% per Kelvin. It features a pulsed red laser diode light source with a wavelength of 656 nm and a maximum optical peak power of 3 mW, classified under Laser class 1. The device is equipped with a touch display and RS485 for adjustments, and it operates within a voltage supply range of 15 to 28 VDC. It includes multiple outputs such as analog and RS 485, with a switching output of push-pull and an output function for alarms. The device is housed in an aluminum casing with a glass front, measuring 26 mm in width, 74 mm in height, and 55 mm in depth, and weighs 130 g. It is designed to withstand harsh environments with an IP 67 protection class, operating temperatures between -20 to +50 °C, and is resistant to ambient light up to 25 kLux. The device also meets rigorous standards for vibration and shock resistance as per IEC specifications.
- Type:
- Measuring mode: edges, center, width, gap
- Version:
- PosCon OXE7
- Measuring range (width):
- 75 125 mm
- Measuring range (distance):
- 150 250 mm
- Measuring frequency:
- 125 500 Hz
- Resolution:
- 30 50 µm
- Repeat accuracy:
- ± 10 µm
- Smallest detectable object width:
- 1.5 mm
- Smallest detectable gap:
- 2 mm
- Smallest detectable step:
- 2 mm
- Linearity error:
- ± 80 120 µm
- Temperature drift:
- < 0,05 % measured value/K
- Power on indication:
- LED green
- Output indicator:
- LED yellow / LED red
- Light source:
- Pulsed red laser diode
- Wave length:
- 656 nm
- Laser class:
- 1
- Optical peak power max.:
- 3 mW
- Adjustment:
- Touch Display, RS485
- Response time / release time:
- 4 16 ms
- Voltage supply range +Vs:
- 15 28 VDC
- Current consumption max. (no load):
- 150 mA
- Output circuit:
- Analog and RS 485
- Output signal:
- 4 ... 20 mA / 0 ... 10 VDC
- Switching output:
- Push-pull
- Output function:
- Out 1 / Alarm
- Output current:
- 100 mA
- Baud rate:
- 115200, adjustable
- Reverse polarity protection:
- Yes, Vs to GND
- Short circuit protection:
- Yes
- Width / diameter:
- 26 mm
- Height / length:
- 74 mm
- Depth:
- 55 mm
- Design:
- Rectangular, front view
- Housing material:
- Aluminum
- Front (optics):
- Glass
- Connection types:
- Connector M12 8 pin
- Weight:
- 130 g
- Ambient light immunity:
- < 25 kLux
- Operating temperature:
- -20 +50 °C
- Protection class:
- IP 67
- Storage temperature:
- -25 +75 °C
- Vibration (sinusoidal):
- IEC 60068-2-6:2008 1.5 mm p-p at f = 10 - 57 Hz, 10 cycles per axis 10 g at f = 58 - 2000 Hz, 10 cycles per axis
- Shock (semi-sinusoidal):
- IEC 60068-2-27:2009 50 g / 11 ms resp. 100 g / 6 ms, 10 jolts per axis and direction 100 g / 2 ms, 5000 jolts per axis and direction
- Datasheet:
- View
- Operating Manual:
- View
- QN-QUOTE-REQUEST:
- true
