Baumer

Baumer UF200.PA0-GP2J.72CU

(No reviews yet) Write a Review
SKU:
11708346
MPN:
11708346
Condition:
New
Scanning range Sd:
20 … 1000 mm
Scanning range close limit Sdc:
20 … 1000 mm
Scanning range far limit Sde:
20 … 1000 mm
Version:
IO-Link dual channel Multiplex version
Hysteresis typ.:
4 % Sde
Repeat accuracy:
0.5 mm
Temperature drift:
< 2 % of distance to target Sde
Power-up drift:
Compensated after 15 min.
Response time ton/toff min:
< 24 ms
Response time ton/toff standard:
< 60 ms
Sonic frequency:
220 kHz
Adjustment:
qTeach, IO-Link
Light indicator:
Yellow LED / red LED
Power on indication:
LED green
Alignment measuring axis:
< 2°
Voltage supply range +Vs:
12 … 30 VDC
Current consumption typ.:
16 mA
Output circuit:
Push-pull
Output current:
<100 mA
Voltage drop Vd:
<3 VDC
Residual ripple:
< 10 % Vs
Short circuit protection:
Yes
Reverse polarity protection:
Yes, Vs to GND
Design:
Rectangular
Housing material:
Plastic (ASA, PMMA)
Width / diameter:
20.5 mm
Height / length:
41 mm
Depth:
15 mm
Connection types:
Cable 4 pin, 2 m
Operating temperature:
-25 … +65 °C
Storage temperature:
-25 … +75 °C
Protection class:
IP 67
Datasheet:
View
Operating Manual:
View
$344.00

Description

The Baumer UF200.PA0-GP2J.72CU is an ultrasonic sensor with a scanning range of 20 to 1000 mm, featuring IO-Link dual channel and multiplex capabilities. It offers a repeat accuracy of 0.5 mm and a hysteresis of approximately 4% at the far limit. The sensor is designed to minimize temperature and power-up drifts, with a response time as low as 24 ms. Operating at a sonic frequency of 220 kHz, it includes qTeach and IO-Link for adjustments, and LED indicators for power and status. The sensor operates on a 12 to 30 VDC supply, with a typical current consumption of 16 mA. It includes push-pull output, short circuit and reverse polarity protection, and is housed in a durable plastic casing measuring 20.5 mm in width, 41 mm in length, and 15 mm in depth. Suitable for temperatures ranging from -25 to +65 °C, it is IP 67 rated for protection against dust and water ingress. The sensor connects via a 4-pin, 2-meter cable.
View AllClose