The Baumer VS XC800M20X00IP is a high-performance industrial camera featuring a 1/1.8? CCD monochrome sensor with a resolution of 1600 × 1200 px. It supports external illumination with an integrated VeriFlash® flash controller and offers two operational modes: high-resolution with up to 21 inspections per second and high-speed mode with up to 35 inspections per second at limited resolution. The camera can handle up to 255 different jobs, with each job allowing up to 32 features. It utilizes Baumer FEX® 4.0 for advanced signal processing and has a defect image memory capacity of 4. Equipped with a C-mount lens, the camera operates on a 24 V ±25% power supply and consumes a maximum of 42 W. It includes digital and analog inputs and outputs, supports Ethernet and PROFINET for connectivity, and features a configurable web interface for visualization. The robust aluminum housing and PMMA cover glass ensure durability in industrial environments. Dimensions are 53 mm in width, 99.5 mm in height, and 49.8 mm in depth, with a weight of less than 300 g.
- Resolution:
- 1600 × 1200 px
- Sensor type:
- 1/1.8? CCD, monochrome
- Illumination:
- external, available as accessory
- Illumination connection:
- direct (integrated VeriFlash® flash controller)
- High-resolution mode:
- max. 21 inspections per second
- High-speed mode (limited resolution):
- max. 35 inspections per second
- Number of jobs (products):
- ? 255
- Features per job:
- 32
- Signal processing:
- Baumer FEX® 4.0
- Defect image memory:
- 4
- Lens:
- C-mount
- Nominal voltage power supply:
- 24 V ±25 %
- Nominal voltage power supply (add-on):
- Class 2 according to NEC / protection class III
- Nominal voltage power supply (info):
- The device is intended for supply from an isolated limited power source according to UL61010-1, 3rd ed cl. 9.4 or a limited energy source according to UL60950-1 or Class 2 according to NEC.
- Power consumption:
- Max. 42 W (with I/O and lighting)
- Inputs:
- 8 30 V (polarity protected)
- Digital inputs:
- 5 inputs trigger job selection external teach-in encoders (CH-A, CH-B) 500 kHz
- Outputs:
- PNP Ipeak = 100 mA and Ieff = 50 mA (short-circuit proof)
- Digital outputs:
- 5 outputs Pass / Fail Flash Sync Alarm Camera Ready Output Enable
- Initial setup:
- Ethernet (10BASE-T / 100BASE-TX)
- Process interface:
- PROFINET (CC-A) EtherNet/IP TCP/UDP (Ethernet)
- Visualization:
- configurable web interface with MultiViewer function
- Width:
- 53 mm (without lens/tube)
- Height:
- 99.5 mm (without lens/tube)
- Depth:
- 49.8 mm (without lens/tube)
- Weight:
- ? 300 g (without lens/tube)
- Material:
- housing: aluminum cover glass XC tube: PMMA
- Datasheet:
- View
- Operating Manual:
- View
