The Baumer VS XF800M03W08IP is a high-performance vision sensor featuring a 1/3? CMOS monochrome sensor with a resolution of 752 × 480 px. It includes integrated white LED illumination, classified as LED class risk group 1, ensuring safe operation under EN 62471:2008 standards. The device offers two operational modes: a high-resolution mode with a maximum of 50 inspections per second and a high-speed mode with limited resolution at up to 100 inspections per second. It can handle object distances ranging from 50 mm to 450 mm and supports up to 255 jobs with 32 features per job. The sensor is equipped with Baumer FEX® 4.0 signal processing, a defect image memory for 32 images, and an 8 mm lens. Power requirements are 24 V ±25%, with a maximum power consumption of 18 W including I/O operations. It features multiple digital inputs and outputs for enhanced connectivity and control, including options for trigger, job selection, and external teach-in. Setup is facilitated through an Ethernet connection, and it supports PROFINET, EtherNet/IP, and TCP/UDP protocols. The device's web interface is configurable and includes a MultiViewer function for enhanced visualization. The sensor's compact design measures 53 mm in width, 99.5 mm in height, and 38 mm in depth, weighing less than 250 g, with a durable aluminum housing and PMMA cover glass.
- Resolution:
- 752 × 480 px
- Sensor type:
- 1/3? CMOS, monochrome
- Illumination:
- integrated, LED white
- LED class:
- risk group 1 (low risk, EN 62471:2008)
- High-resolution mode:
- max. 50 inspections per second
- High-speed mode (limited resolution):
- max. 100 inspections per second
- Object distance min.:
- 50 mm
- Object distance max.:
- 450 mm
- Number of jobs (products):
- ? 255
- Features per job:
- 32
- Signal processing:
- Baumer FEX® 4.0
- Defect image memory:
- 32
- Lens:
- 8 mm
- Nominal voltage power supply:
- 24 V ±25 %
- Nominal voltage power supply (add-on):
- Class 2 according to NEC / protection class III
- Nominal voltage power supply (info):
- The device is intended for supply from an isolated limited power source according to UL61010-1, 3rd ed cl. 9.4 or a limited energy source according to UL60950-1 or Class 2 according to NEC.
- Power consumption:
- Max. 18 W (with I/O)
- Inputs:
- 8 30 V (polarity protected)
- Digital inputs:
- 5 inputs trigger job selection external teach-in encoders (CH-A, CH-B) 500 kHz
- Outputs:
- PNP Ipeak = 100 mA and Ieff = 50 mA (short-circuit proof)
- Digital outputs:
- 5 outputs Pass / Fail Flash Sync Alarm Camera Ready Output Enable
- Initial setup:
- Ethernet (10BASE-T / 100BASE-TX)
- Process interface:
- PROFINET (CC-A) EtherNet/IP TCP/UDP (Ethernet)
- Visualization:
- configurable web interface with MultiViewer function
- Width:
- 53 mm
- Height:
- 99.5 mm
- Depth:
- 38 mm
- Weight:
- ? 250 g
- Material:
- housing: aluminum cover glass: PMMA
- Datasheet:
- View
- Operating Manual:
- View
