Datasensing FALW/BP-1E Sensors

The Datasensing FALW/BP-1E Sensors offer a comprehensive solution for precise detection needs. These M18 sensors are designed with a robust 10...30 Vdc power supply and feature both axial and radial optics with a flat surface for versatile application. The visible red laser emission models ensure accurate detection, while the IP67 protection degree guarantees durability in various environments. Available in metallic or plastic housing, these sensors include sensitivity adjustment for tailored performance. They provide total protection against electrical damages and are CE and cULus listed for quality assurance. With a nominal sensing distance of 150mm and a thermal drift of Sr at ?10% Sr, these sensors maintain high accuracy with a repeat accuracy of 10%. The trimmer allows for easy sensitivity adjustment, and the minimum sensing distance (blind zone) is 30mm. The sensors operate on the principle of background suppression and feature an axial optic position. The output type is PNP NO+NC, with a switching frequency of 1.5kHz and a response time of 333µs. They operate efficiently within a voltage range of 10…30VDC, with a no-load supply current of ? 30mA and a load current of ?100mA. The sensors are equipped with short-circuit and reverse polarity protection, ensuring reliable operation. The housing is made from nickel-plated brass or PA12 plug, with an active head material of PMMA/ABS, and they are designed to withstand operating temperatures from -15°C to +55°C. The sensors are EMC compatible with EN 60947-5-2 standards and can endure shocks and vibrations as per IEC standards. Supplied with M18 x 1 nuts and a screwdriver, these sensors are ready for immediate installation and use.