Description
Technical Data
Input
Type of function
1-channel 2 pin switching
Rated voltage UN
DC 24 V
Operation voltage range
DC 20.4??28.8 V
Rated current IN
DC 10 A
Supply current
DC 16 A via LCOS Powerbus
Reverse voltage protection
internal electronics
Control input (Set / Reset)
Signal level
DC 24 V acc. to EN 61131
OFF
Pulse with falling edge >100 ms, <800 ms
ON
Pulse with falling edge > 1 s
Isolation voltage
1.5 kV
Output
Switching element
MOSFET and relay (galvanic separation: 500 V)
Output current
max. DC 10 A
Voltage drop
<170 mV (10 A)
Status display output
- LED green: operating voltage ON, no fault, green flashing: 90 % IB.
- LED red: OFF. Red flashing: triggered.
Switch-on capacity
>10000 ???F
Current range
1 A ?? 10 A (adjustable via switch in 1 A steps)
Characteristic
fast (1), medium (2), slow 1 (3), slow 2 (4), slow 3 (5), adjustable via switch, see 'characteristic curves'
Signal output
Switching element
Relay, N/O contact, AC/DC 250 V, 1 A
Single channel message
Contact closed: error, Contact open: no error
90 % of the rated current IB
Contact closed: >90 %, Contact open: <90 %
General
Operation temperature range
0 ???C ?? +55 ???C
Storage temperature range
-40???C??70???C
Dimensions (w ?? h ?? d)
22,5??110??102 mm
(including function carrier, without plug-in terminals on the side)
Housing material
PA 6.6 (UL 94 V-0, NFF I2, F2)
Mounting
- plug-in
- on LCOS function carrier
- 22.5 mm (Accessories)
- DIN rail mounting
- (EN 60715)
Protection class
IP20
Installation position
any
Vibration resistance
Vibration: EN 60068-2-6 Fc, shock: EN 60068-2-27 Ea
Climatic conditions
Acc. to EN 60721 Stationary use at weather protected locations
Over voltage category
II
Degree of polution
2
Connection type load side
X1: 8-pin multi-point plug, RM 5.08, screw terminal
Connection type control side
X2: 12-pin multi-point plug, RM 3,5, screw terminal
Connection type
- single wire
- 0.08 mm2??1.5 mm2 / AWG 28??16
Strip length
RM 3.5: 9 mm, RM 5.08: 10 mm
Weight
0,2 kg/piece
Approvals
- cULus (E170585)
- UL 61010
- CE
- GL in preparation
Standards
- EN 61131-2
- EN 55016-1-2
- EN 60529
- EN 61000-6-2/4
PU
1 piece
Note
Included in the delivery
Plug-in terminals : CS 5.08 and CS 3.50
Not included in the delivery
Function carrier and other accessories