Description
Technical Data
Input
Number of phases
1
Rated voltage UN
AC 100??240 V
Rated frequency fN
50 Hz / 60 Hz
Rated current IN
0.70 A @ AC 230 V
Inrush current
<20 A @ AC 230 V
Internal fuse
4 A Typ-T AC 250 V
External fuse
6 A Typ-B (IEC 60947-2 / UL 1077)
The external fuse must be installed close to the LCOS-PS and must be easily accessible for the user.
Power Factor Correction P.F.C.
>0.96
Output
Rated voltage UN
24V
Rated current IN
5 A
Max. output current
>7.5 A, 5 s @ Uout > 90 %
Short-circuit current
??
Setting range Uout min./Uout max.
DC 23??27.5 V
Load regulation
downslope -2 % @ 5 A
Line regulation
0.5 %
Rise time
< 1 S
Ripple and Noise
?100 mV pp
Hold up time
>20 ms
Status indication DC ON LED green
?21.6 V
Status indication DC LOW LED red
Iout >110 % IN
Parallel / redundant mode
max. 4 devices / redundancy via decoupling diode
Efficiency
>93 %
Protection device
Over voltage protection
Over voltage protection
35 V
Power loss (nominal operations) max.
9 W @ 230 V
Rated over load protection
yes
Short circuit
Current limit (overload), Hiccup (short-circuit)
Status indication
Status display output
- DC ON, green ?21.6 V
- Iout > 110 % IN
Monitoring
DC ON Control (Rdy)
Open Collector
Protection
DC ON, open collector
Switching voltage
DC 30 V
Switching current
max. 0.100 A
Remote input
control voltage
DC 24 V
Control current
DC 5 mA
ON/OFF
11 V ?? 30 V: OFF, DC 5 V: ON
General
Insulation voltage input / output
AC 3.0 kVeff
Insulation voltage input / ground
AC 1.5 kVeff
Insulation voltage output / ground
DC 0.5 kVeff
Derating
>50 ???C: -4 W/???C
Operation temperature range
-25 ???C ?? +70 ???C (for UL applications: ambient temperature max. +55 ???C)
Storage temperature range
-25???C??85???C
MTBF
>500000 h: SN29500 / >150000 h: MIL HDBK 217F
Relative air humidity
20 ?? 95 % RH, not condensing
Cooling
Air convection
Housing material
PA 6.6 (UL 94 V-0, NFF I2, F2)
Color of the housing
pebble grey
Mounting
- DIN rail mountable TS35
- (EN 60715)
Application height
2000 m
Installation position
vertical
Protection class
IP20
Protection class
I (SELV, PELV)
Over voltage category
II (IEC 664-1)
Degree of polution
2
Weight
0,35 kg/piece
Connection type
- Screw terminal
- 0.08 mm2 ?? 2.5 mm2
- AWG 28 ?? AWG 12
- input: 3-pin
- output: 8-pole
Dimensions (w ?? h ?? d)
35??100??110 mm
Approvals
cULus in preparation
Standards
- EN 61204-3:2000
- EN 60950-1:2006+A1:2010+A2:2013
- EN 61000-6-2:2005
- EN 61000-6-4:2007
- EN 61010-1:2010
- EN 50581:2012
PU
1 piece
Note
Included in the delivery
Plug-in terminals : CS 5.08 and CS 3.50
Not included in the delivery
Function carrier and other accessories
Dimensions
