Schneider Electric

Schneider Electric 2510KF1 Switch, manual, 30A, 2 pole, 3 HP at 575 VAC, single phase, toggle operated, no indicator, NEMA 1 flush mount

(No reviews yet) Write a Review
SKU:
2510KF1
MPN:
2510KF1
Condition:
New
Depth:
2.75 in
Poles Description:
2P
Maximum Horse Power Rating:
2 hp 115 V AC || 2 hp 230 V AC || 3 hp 460 V AC || 3 hp 575 V AC || 1 hp 90 V DC || 2 hp 115 V DC || 1.5 hp 230 V DC
Nema Degree Of Protection:
not rated (flush plate) painted sheet steel standard size
Control Type:
toggle
Motor Starter Type:
non reversing
Electrical Connection:
screw clamp terminals
Warranty:
18 months
[Ue] Rated Operational Voltage:
600 V AC || 230 V DC
Awg Gauge:
AWG 14...AWG 10 copper
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Local Signaling:
no indicator
Product Certifications:
UL listed file E42243 CCN NLRV || CSA LR25490 class 3211 05
Range Of Product:
K
Product Or Component Type:
Single Unit Manual Switch
Line Rated Current:
30 A
Country of Origin:
United States
Phase:
1 phase
Eu Rohs Directive:
Not compliant
Pvc Free:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
$62.02

Description

2510K manual motor switches are Intended for industrial, commercial and residential applications. These switches are for applications where overload protection is not required or is provided separately. Manual motor switches provide manual On Off control of small motors. Manual Switches. These nonreversing manual switches are toggle operated. The maximum operational voltage is 600 VAC and 250 VDC. This two pole switch is rated for 2 HP at 115VAC, 2 HP at 230VAC, 3 HP at 460VAC, 3 HP at 600VAC single phase, 1 HP at 90 VDC, 2 HP at 115 VDC and 1.5 HP at 230 VDC and 30A continuous. The screw clamp terminals will accept 14 to 10 AWG copper wire. This switch has no pilot light indicator. This NEMA 1 flush mounted unit with a gray flush plate can be mounted in a standard switch box or in a machine cavity without a box. Enclosure is 4.25 inches tall, 2.44 inches wide and 2.75 inches deep. This device is UL Listed and CSA certified.
View AllClose

Related Products

Related Products