Schneider Electric

Schneider Electric 2510KG1 Switch, manual, 30A, 2 pole, 3 HP at 575 VAC, single phase, toggle operated, no indicator, NEMA 1 enclosure

(No reviews yet) Write a Review
SKU:
2510KG1
MPN:
2510KG1
Condition:
New
Depth:
2.75 in
Country of Origin:
United States
Awg Gauge:
AWG 14...AWG 10 copper
Local Signaling:
no indicator
Line Rated Current:
30 A
Range Of Product:
K
Cable Entry:
0.5" and 0.75" knock-outs (top and bottom)
[Ue] Rated Operational Voltage:
600 V AC || 230 V DC
Warranty:
18 months
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Maximum Horse Power Rating:
2 hp 115 V AC || 2 hp 230 V AC || 3 hp 460 V AC || 3 hp 575 V AC || 1 hp 90 V DC || 2 hp 115 V DC || 1.5 hp 230 V DC
Electrical Connection:
screw clamp terminals
Control Type:
toggle
Poles Description:
2P
Product Or Component Type:
Single Unit Manual Switch
Nema Degree Of Protection:
NEMA 1 Plastic standard size
Weight:
0.38 kg
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Phase:
1 phase
Net Weight:
0.38 kg
Motor Starter Type:
non reversing
Pvc Free:
Yes
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Product Certifications:
UL listed file E42243 CCN NLRV || CSA LR25490 class 3211 05
Eu Rohs Directive:
Not compliant
$69.36

Description

2510K manual motor switches are Intended for industrial, commercial and residential applications. These switches are for applications where overload protection is not required or is provided separately. Manual motor switches provide manual On Off control of small motors. A variety of enclosures are available. This nonreversing manual switches is toggle operated. The maximum operational voltage is 600 VAC and 250 VDC. This two pole switch is rated for 2 HP at 115VAC, 2 HP at 230VAC, 3 HP at 460VAC, 3 HP at 600VAC single phase, 1 HP at 90 VDC, 2 HP at 115 VDC and 1.5 HP at 230 VDC and 30A continuous. The screw clamp terminals will accept 14 to 10 AWG copper wire. This switch has no pilot light indicator. This NEMA 1 general purpose enclosure is a surface mounting enclosure. The enclosure has has a 0.5 and 0.75 knockout on the top and bottom. The enclosure is 4.25 inches tall, 2.44 inches wide and 2.75 inches deep. It weighs 0.84 lb. This device is UL Listed and CSA certified.
View AllClose

Related Products

Related Products