Schneider Electric

Schneider Electric 8736SCO8V02H30S NEMA starter, Type S, reversing, horizontal, Size 1, 27A, 10HP at 575VAC, up to 100kA SCCR, 3 phase, 3 pole, Motor Logic SSOLR, 120VAC coil, open

(No reviews yet) Write a Review
SKU:
8736SCO8V02H30S
MPN:
8736SCO8V02H30S
Condition:
New
Poles Description:
3P
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Line Rated Current:
27 A
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Electrical Connection:
screw clamp terminals
Control Circuit:
separate control circuit
Product Certifications:
UL Listed || CSA
Motor Starter Type:
reversing
Country of Origin:
Mexico
Phase:
3 phase
[Uc] Control Circuit Voltage:
110 V AC 50 Hz || 120 V AC 60 Hz
Control Units:
no control units
Range Of Product:
S
[Ue] Rated Operational Voltage:
600 V AC
Depth:
134.87 mm
Warranty:
18 months
Local Signaling:
without pilot light
Rated Power In Hp:
7.5 HP 200 V AC || 7.5 HP 230 V AC || 10 HP 460 V AC || 10 HP 575 V AC
Installation Direction:
horizontal
Wiring Mode:
3 wires
Nema Size:
1
Auxiliary Contact Composition:
without
Nema Degree Of Protection:
not rated (open device)
Thermal Overload Type:
solid state Motor Logic class 10/20
Product Or Component Type:
starter
Eu Rohs Directive:
Not compliant
$1,334.00

Description

Type S NEMA reversing magnetic starters are used for full voltage starting, stopping, and reversing AC squirrel cage motors. NEMA 8736 reversing starters are available in NEMA Sizes 00 to 7 and have ratings up to 810 amperes. NEMA reversing starters consist of two 8502S NEMA contactors that are mechanically and electrically interlocked and an overload relay. Sizes 0-5 reversing starters are available in either horizontal or vertical arrangements. This reversing starter is arranged horizontally. This 3 pole NEMA Size 1 reversing starter has an 27 ampere rating. This three phase NEMA Size 1 reversing starter has 7.5 HP at 200 and 230 VAC and 10 HP at 460 and 575 VAC ratings. This reversing NEMA motor starter has a Motor Logic overload relay with a 9A to 27A Class 30 range to sense over current conditions. This NEMA starter has a 100 kA maximum SCCR (Short Circuit Current Rating) per UL508A when protected by an appropriate circuit breaker or fuse. Type S motor starters are available with replaceable coils in a wide variety of voltages. This starter has a 110/120 VAC 50/60 Hz operating coil wired for separate control. A painted sheet steel NEMA 1 general purpose enclosure is used to protect this starter. This starter is 6.91 inches tall, 7.13 inches wide and 5.31 inches deep. A wide variety of accessories are available for Type S starters. Type S reversing NEMA motor starters are UL listed and CSA certified.
View AllClose