Schneider Electric 8911DPSG32V09 Starter, Definite Purpose, nonreversing, 30A, 2 pole, 1 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1
Schneider Electric
$423.99
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric 8911DPSG32V09 Starter, Definite Purpose, nonreversing, 30A, 2 pole, 1 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1
8911 definite purpose starters are inexpensive starters for applications with relatively low duty cycles. Typical applications include air compressors, agricultural equipment, pumps, and HVAC equipment. This two pole definite purpose starter has a full load rating of 30 amperes. This starter has ratings of 2 HP at 115 VAC and 5 HP at 230 VAC single phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 208 to 240 VAC 60 HZ and 220 VAC 50 Hz coil. The starter has straight through wiring. The melting alloy type overload relay uses Type B thermal units to sense over current conditions. A painted sheet steel NEMA 1 general purpose enclosure is used to protect this definite purpose starter. Enclosure is 10.00 inches tall, 6.00 inches wide and 5.56 inches deep. Auxiliary contacts are available for these starters. 8911DPS definite purpose starters are UL component recognized.
- Eu Rohs Directive:
- Compliant with Exemptions
- Nema Degree Of Protection:
- NEMA 1
- Warranty:
- 18 months
- Locked Rotor Rated Current:
- 180 A 230 V AC || 150 A 460 V AC || 120 A 575 V AC
- Range Of Product:
- DPS
- Maximum Horse Power Rating:
- 2-2 hp 115 V AC, 1 phase || 5-5 hp 230 V AC, 1 phase
- Phase:
- 1 phase
- [Ue] Rated Operational Voltage:
- 600 V AC
- Country of Origin:
- Mexico
- China Rohs Regulation:
- Product out of China RoHS scope. Substance declaration for your information.
- Enclosure Material:
- painted sheet steel
- [Uc] Control Circuit Voltage:
- 220 V AC 50 Hz || 208...240 V AC 60 Hz
- Rohs Exemption Information:
- Yes
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Poles Description:
- 2P
- Number Of Thermal Units Required:
- 1
- Mercury Free:
- Yes
- Thermal Overload Type:
- melting alloy
- Product Or Component Type:
- Definite Purpose Starter
- Line Rated Current:
- 30 A
