Schneider Electric

Schneider Electric ABL8RPS24050 Univ.Power Sup.1P 24V 5A

(No reviews yet) Write a Review
SKU:
ABL8RPS24050
UPC:
3389119405614
Condition:
New
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Circularity Profile:
ENVEOLI120913EN
Power Factor:
0.51 at 240 V AC || 0.59 at 120 V AC
Dielectric Strength:
3500 V with between input and ground || 4000 V with between input and output || 500 V with between output and ground
Operating Altitude:
6561.68 ft (2000 m)
Permissible Temporary Current Boost:
1.5 x In for 4 s)
Connections - Terminals:
removable screw terminal block 2 x 2.5 mm², diagnostic relay || screw type terminals 3 x 0.5...3 x 4 mm², AWG 22...AWG 12) input connection || screw type terminals 1 x 0.5...1 x 4 mm², AWG 22...AWG 12) input ground connection || screw type termina
China Rohs Regulation:
X
Pvc Free:
Yes
Mounting Support:
35 x 15 mm symmetrical DIN rail || 35 x 7.5 mm symmetrical DIN rail
Ambient Air Temperature For Operation:
50-60 °C with derating factor mounting position A < 6561.68 ft (2000 m) || -25-50 °C without derating mounting position A < 6561.68 ft (2000 m)
Ip Degree Of Protection:
IP20 conforming to IEC 60529
Mercury Free:
Yes
Efficiency:
0.87
Anti-Harmonic Filter:
low frequency harmonic currents
Net Weight:
0.7 kg
Environmental Disclosure:
ENVPEP061201EN
Rohs Exemption Information:
Yes
Product Certifications:
cCSAus || EAC || KC || RCM || UL
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Environmental Characteristic:
EMC IEC 61000-6-1 || EMC IEC 61000-6-3 || EMC EN 55024 || EMC IEC 61000-6-4 || EMC EN/IEC 61204-3 || safety IEC 60950-1 || safety EN/IEC 61204-3
Height:
143 mm
Width:
56 mm
Input Voltage:
100...120 V AC single phase N-L1 || 200...500 V AC phase to phase L1-L2
Range Of Product:
Modicon Power Supply
Operating Position:
vertical
Output Protection Type:
against overload manual or automatic reset || against overvoltage 30...32 V, manual reset || against short-circuits manual or automatic reset || against undervoltage tripping if U < 21.6 V || thermal automatic reset
Kw Rating:
120 W
Standards:
CSA C22.2 No 60950-1 || UL 508 || EN/IEC 62368-1
Output Voltage:
24 V DC
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Power Dissipation In W:
15.5 W
Power Supply Output Current:
0.208333333333333
Warranty:
18 months
Power Supply Type:
regulated switch mode
Sustainable Offer Status:
Green Premium product
Output Voltage Limits:
24...28.8 V adjustable
Output Coupling:
parallel || series
Depth:
125 mm
Provided Equipment:
power factor correction filter IEC 61000-3-2
Inrush Current:
30 A
Product Or Component Type:
power supply
Status Led:
1 LED (green and red) output voltage || 1 LED (green, red and orange) output current
Marking:
CE
Supply:
SELV IEC 60950-1 || SELV IEC 60204-1 || SELV IEC 60364-4-41
Efficiency At Full Load:
85...132 V AC || 170...550 V AC
Catalog:
View
Datasheet:
View
$360.00

Description

This ABL8 regulated switch mode power supply (SMPS) supplies direct current voltage. It has a rated input of 100V to 500V AC, a rated output current of 5A at 24V DC and a rated power output of 120W. Most of these power supplies have auto protection reset. A few have auto / manual protection reset. Some of these power supplies can be mounted directly to a panel. It is also equipped with a PFC (Power Factor Correction) filter. It has LED diagnostics indicator available in the front for troubleshooting instantly. Automatic reset allows short-term faults to be cleared and systems to restart without the need to disturb on-duty maintenance engineers. It installs on DIN rail and is 56mm-wide. It weighs 0,700kg. It is a power supply for industrial use, rail mounting. It conforms to UL 508, CSA C22.2 No 60950-1 standards. The GB2CD07, GB2CD08, GV2RT06 and GV2ME06 thermal magnetic circuit breakers are recommanded for its protection. It has LED diagnostics indicator available in the front for troubleshooting instantly. It installs on DIN rail. It brings energy to your automated systems. Designed for simple machines and applications, modular power supplies are primarily appreciated for their extreme compactness.
View AllClose