Schneider Electric

Schneider Electric ABLS1A12062 Power Supply 12V 6.2A 1Ph Optimized

(No reviews yet) Write a Review
SKU:
ABLS1A12062
UPC:
3606481500199
Condition:
New
Product Or Component Type:
power supply
Sustainable Offer Status:
Green Premium product
Status Led:
1 LED (Green) output voltage
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Pollution Degree:
2
Efficiency:
87 % 230 V AC
Mounting Support:
top hat type TH35-15 rail IEC 60715 || top hat type TH35-7.5 rail IEC 60715 || double-profile DIN rail
Electrical Shock Protection Class:
class I
Efficiency At Full Load:
85...264 V AC without temperature derating || 120...375 V DC without temperature derating || 85…120 V DC with temperature derating
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Current Consumption:
< 1.8 A 115 V AC || < 1 A 230 V AC || < 0.8 A 140 V DC
Power Supply Type:
regulated switch mode
Holding Time:
> 20 ms 115 V AC || > 40 ms 230 V AC
Output Voltage:
12 V DC
Output Voltage Limits:
11...14 V
Response Time:
< 1.2 s
Inrush Current:
40.0 A 115 V || 80.0 A 230 V
Electromagnetic Compatibility:
immunity to electrostatic discharge - test level: 8 kV (contact discharge) conforming to IEC 61000-4-2 || immunity to electrostatic discharge - test level: 15 kV (air discharge) conforming to IEC 61000-4-2 || immunity to conducted RF disturbances - t
Input Protection Type:
integrated fuse (not interchangeable) 5 A || external protection (recommended) 20 A Curve C || external protection (recommended) 13 A Curve B || external protection (recommended) 10 A Curve C
Input Voltage:
100...240 V AC single phase || 100...240 V AC phase to phase || 140...340 V DC
Load Capacitance:
5000 µF
Rohs Exemption Information:
Yes
Connections - Terminals:
screw connection 0.5...2.5 mm², AWG 20...AWG 14) output || screw connection 0.75...2.5 mm², AWG 18...AWG 14) input
Service Life:
10 year(s)
Ip Degree Of Protection:
IP20
Ambient Air Temperature For Operation:
-20--10 °C with current derating of 1 % per °C mounting position A < 6561.68 ft (2000 m) || -10-40 °C without derating mounting position A 115 V AC < 6561.68 ft (2000 m) || -10-50 °C without derating mounting position A 230 V AC < 6561.68 ft (200
Net Weight:
0.22 kg
Output Protection Type:
against overload and short-circuits automatic reset || against over temperature manual reset || against overvoltage manual reset
Line And Load Regulation:
< 0.5 % network 0 to 100 % load at 25 °C || < 1 % network full voltage range in line at 25 °C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Width:
27 mm
Product Certifications:
CE || cUL Listed || cUL Recognized || RCM || CB Scheme || EAC || KC || NEC class 2
Enclosure Material:
Plastic
Depth:
102 mm
Standards:
IEC 62368-1 || EN/IEC 61010-1 || EN 61010-2-201 || EN/IEC 61204-3 || IEC 61000-6-1 || IEC 61000-6-2 || IEC 61000-6-3 || IEC 61000-6-4 || IEC 61000-3-2 || EN 61000-3-3 || UL 62368-1 || UL 61010-1 || UL 61010-2-201 || CSA C22.2 No 62368-1 || CSA C22.2
Earthing System:
TN || TT || IT
Kw Rating:
75 W
Circularity Profile:
ENVEOLI2007005EN
Dielectric Strength:
3000 V AC with input to output
Shock Resistance:
150 m/s² 11 ms
Mercury Free:
Yes
Electromagnetic Emission:
conducted emissions IEC 61000-6-3 || radiated emissions IEC 61000-6-4
Power Supply Output Current:
6.25 A
Environmental Disclosure:
ENVPEP2007005EN
Network Frequency Limits:
50-60 Hz
Overvoltage Category:
II
Supply:
SELV IEC 60950-1 || SELV IEC 60204-1 || SELV IEC 60364-4-41
Operating Altitude:
< 5000 m overvoltage category III
Output Coupling:
parallel || serial
Range Of Product:
Modicon Power Supply
Vibration Resistance:
3 mm 2-9 Hz)IEC 60068-2-6 || 10 m/s² 9-200 Hz)IEC 60068-2-6
Meantime Between Failure [Mtbf]:
700000 h at 25 °C, full load conforming to SR 332
Power Factor:
0.55 at 115 V AC || 0.45 at 230 V AC
Height:
123.6 mm
China Rohs Regulation:
X
Power Dissipation In W:
16 W
Maximum Leakage Current:
1 mA 240 V AC
Residual Ripple:
< 120 mV
Catalog:
View
Datasheet:
View
$115.00

Description

This ABLS regulated switch mode power supply (SMPS) supplies direct current voltage. It has a rated input of 100V to 240V AC and 140 V to 340 V DC, a rated output current of 6,25A at 12V DC and a rated power output of 75W. It is ideal for supplying DC voltage necessary for automation equipment designed for applications in industrial, commercial and residential applications such as conveying, packaging, control, food & beverage, mining, oil & gas and water. It installs on omega rail or fixing by screw. Its width is 27mm, its height is 123,6mm, its depth is 102mm. It ensures a protection against overloads and short-circuits with automatic restart after the source of overload/short-circuit has been corrected. It weighs 0.220kg. It is a power supply for industrial use, rail mounting. It conforms to EN62368-1, ENIEC61010-1/2-201, ENIEC61204-3, EN61000-6-1/2/3/4, EN61000-3-2-3, UL62368-1, UL61010-2-201/-1-201, CSAC22.2No62368-1/No61010-2-201/No61010-1 standards, and certified by CE, CUL listed/recognized, RCM, CBscheme. The Acti9 iC60 range of Miniature Circuit Breakers is recommanded for its protection. The type of protection is 10A, C curve or 13A, B-curve. It has in the front face a LED indicating presence of DC output voltage, and a QR code for access to the latest technical documentation. Thanks to its book housing, it can be installed either in enclosures or industrial panels by clipping on omega (DIN) rail. It brings energy to your automated systems. Designed for simple machines and applications, modular power supplies are primarily appreciated for their extreme compactness.
View AllClose

Related Products

Related Products