Schneider Electric ATS01N209RT Soft-Start Stop 9A 440 480V
Schneider Electric
$182.40
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric ATS01N209RT Soft-Start Stop 9A 440 480V
This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 9A. This Altistart 01 can be used for a motor rated power up to 1.5kW or 2hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
- China Rohs Regulation:
- X
- Reach Free Of Svhc:
- Yes
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Power Dissipation In W:
- 4 W at full load and at end of starting || 94 W in transient state
- Ambient Air Temperature For Operation:
- -10-40 °C without derating) || 40-50 °C with current derating of 2 % per °C)
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating || > 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m
- Supply Voltage Limits:
- 414-528 V
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Discrete Input Type:
- logic LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
- Product Destination:
- asynchronous motors
- Function Available:
- integrated bypass
- Net Weight:
- 0.42 kg
- Depth:
- 131 mm
- Current Consumption:
- 45 A at nominal load
- Standards:
- EN/IEC 60947-4-2
- Assembly Style:
- with heat sink
- Marking:
- CE
- Tightening Torque:
- 1.9-2.5 N.m || 0.5-0.5 N.m
- Shock Resistance:
- 15 gn 11 ms EN/IEC 60068-2-27
- Operating Position:
- vertical +/- 10 degree
- Phase:
- 3 phase
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Deceleration Time Symb:
- adjustable from 1 to 10 s
- Relative Humidity:
- 5-95 % without condensation or dripping water EN/IEC 60068-2-3
- Toxic Heavy Metal Free:
- Yes
- Ip Degree Of Protection:
- IP20
- Utilisation Category:
- AC-53B EN/IEC 60947-4-2
- Discrete Input Logic:
- positive LI1, LI2, BOOST < 5 V <= 0.2 mA > 13 V, >= 0.5 mA
- [Uc] Control Circuit Voltage:
- built into the starter
- Display Type:
- 1 LED Green)starter powered up || 1 LED Yellow)nominal voltage reached
- [Us] Rated Supply Voltage:
- 460...480 V - 10...10 %
- Pollution Degree:
- 2 EN/IEC 60947-4-2
- Supply Frequency:
- 50...60 Hz - 5...5 %
- Icl Starter Rating:
- 0.375
- Type Of Start:
- start with voltage ramp
- Maximum Horse Power Rating:
- 5 hp, 3 phase 460...480 V
- Product Or Component Type:
- soft starter
- Starting Torque:
- 30...80 % of starting torque of motor connected directly on the line supply
- Electromagnetic Compatibility:
- conducted and radiated emissions level B CISPR 11 || conducted and radiated emissions level B IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || EMC immunity level 3 EN 50082-1 || EMC
- Product Specific Application:
- simple machine
- Minimum Switching Current:
- 10 mA 6 V DC relay outputs
- Starting Time:
- 1 s / 100 || 5 s / 20 || 10 s / 10 || adjustable from 1 to 10 s
- Compatibility Code:
- ATS01N2
- Ambient Air Temperature For Storage:
- -25-70 °C EN/IEC 60947-4-2
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Range Of Product:
- Altistart 01
- Rohs Exemption Information:
- Yes
- Discrete Input Voltage:
- 24...40 V
- Width:
- 45 mm
- Product Certifications:
- CCC || B44.1-96/ASME A17.5 for starter wired to the motor delta terminal || GOST || CSA || UL || C-tick
- Device Short Name:
- ATS01
- Warranty:
- 18 months
- Discrete Output Type:
- open collector logic LO1 end of starting signal || relay outputs R1A, R1C NO
- Height:
- 124 mm
- Mercury Free:
- Yes
- Vibration Resistance:
- 1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
- Electrical Connection:
- 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit || screw connector - rigid without cable end 1 0.5...2.5 mm² AWG 14 control circuit || 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit || screw connector - rigid
- Discrete Output Voltage:
- 24 V 6...30 V) open collector logic
- Maximum Switching Current:
- relay outputs 2 A 250 V AC cos phi = 0.5 20 ms inductive || relay outputs 2 A 30 V DC cos phi = 0.5 20 ms inductive
- Discrete Output Current:
- 2 A DC-13 || 3 A AC-15
- Network Frequency:
- 47.5...63 Hz
- Output Voltage:
- <= power supply voltage
- Catalog:
- View
- Datasheet:
- View
