Schneider Electric ATS22C14S6U Electronic Soft Starter Control 110V Pow

(No reviews yet) Write a Review
SKU:
ATS22C14S6U
UPC:
3606480167447
Condition:
New
Depth:
229.5 mm
Factory Setting Current:
124 A
Control Circuit Consumption:
20 W
Icl Starter Rating:
140 A connection in the motor supply line for standard applications
Maximum Switching Current:
5 A 250 V AC resistive 1 relay outputs || 5 A 30 V DC resistive 1 relay outputs || 2 A 250 V AC inductive 0.4 20 ms relay outputs || 2 A 30 V DC inductive 7 ms relay outputs
Operating Position:
vertical +/- 10 degree
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Ptc Probe Input:
750 Ohm
Discrete Input Type:
LI1, LI2, LI3) logic, 5 mA 20 kOhm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Discrete Input Number:
3
Product Destination:
asynchronous motors
Product Or Component Type:
soft starter
Marking:
CE
Power Dissipation In W:
82 W for standard applications
Discrete Input Voltage:
110 V <= 121 V
Discrete Output Type:
relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O || relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Mercury Free:
Yes
Network Frequency:
45...66 Hz
Pollution Degree:
level 2 IEC 60664-1
Net Weight:
18 kg
Range Of Product:
Altistart 22
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Discrete Output Number:
2
[Us] Rated Supply Voltage:
208...600 V - 15...10 %
Maximum Horse Power Rating:
100 hp 460 V || 125 hp 575 V || 40 hp 208 V || 50 hp 230 V
Warranty:
18 months
Phase:
3 phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Ambient Air Temperature For Storage:
-25-70 °C
Assembly Style:
with heat sink
Ambient Air Temperature For Operation:
-10-40 °C without derating) || 40-60 °C with current derating 2.2 % per °C)
Relative Humidity:
0-95 % without condensation or dripping water IEC 60068-2-3
Installed Device:
31
Communication Port Protocol:
Modbus
Product Specific Application:
pumps and fans
Transmission Rate:
4800, 9600 or 19200 bps
Type Of Start:
start with torque control (current limited to 3.5 In)
Minimum Switching Current:
100 mA 12 V DC relay outputs)
Physical Interface:
RS485 multidrop
Product Certifications:
C-tick || CCC || CSA || UL || GOST
Electromagnetic Compatibility:
conducted and radiated emissions level A IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electr
[Uc] Control Circuit Voltage:
110 V - 15...10 % 50/60 Hz
Device Connection:
in the motor supply line
Component Name:
ATS22
Type Of Cooling:
forced convection
Height:
356 mm
Standards:
IEC 60947-4-2
Vibration Resistance:
1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm 2-13 Hz)IEC 60068-2-6
Protection Type:
phase failure line || thermal protection motor || thermal protection starter
Discrete Input Logic:
positive logic LI1, LI2, LI3 < 20 V <= 15 mA > 79 V, <= 2 mA
Noise Level:
56 dB
Utilisation Category:
AC-53A
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Supply Frequency:
50...60 Hz - 10...10 %
Output Current:
0.4...1 Icl adjustable
China Rohs Regulation:
X
Ip Degree Of Protection:
IP00
Supply Voltage Limits:
177-660 V
Rohs Exemption Information:
Yes
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m
Width:
150 mm
Function Available:
internal bypass
Connector Type:
1 RJ45
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric ATS22C14S6U Electronic Soft Starter Control 110V Pow
  • Schneider Electric ATS22C14S6U Electronic Soft Starter Control 110V Pow
  • Schneider Electric ATS22C14S6U Electronic Soft Starter Control 110V Pow
$2,688.00

Description

This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line connection. It has a rating of 140A, a rated power from 40HP to 125HP and a rated voltage from 230V to 575V AC. It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
View AllClose