Schneider Electric ATS22C21S6 Electronic Soft Starter Control 220V Pow

(No reviews yet) Write a Review

Write a Review

Schneider Electric ATS22C21S6 Electronic Soft Starter Control 220V Pow

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

ATS22C21S6

UPC:

3606480211317

MPN:

Condition:

New

Operating Position:

vertical +/- 10 degree

Discrete Input Number:

3

Height:

425 mm

Discrete Output Number:

2

Connector Type:

1 RJ45

Pollution Degree:

level 2 IEC 60664-1

Protection Type:

phase failure line || thermal protection motor || thermal protection starter

Width:

206 mm

Product Certifications:

CSA || UL || GOST || C-tick || CCC

Maximum Switching Current:

5 A 250 V AC resistive 1 relay outputs || 5 A 30 V DC resistive 1 relay outputs || 2 A 250 V AC inductive 0.4 20 ms relay outputs || 2 A 30 V DC inductive 7 ms relay outputs

Product Destination:

asynchronous motors

Mercury Free:

Yes

Function Available:

internal bypass

[Uc] Control Circuit Voltage:

230 V - 15...10 % 50/60 Hz

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Ambient Air Temperature For Storage:

-25-70 °C

Ambient Air Temperature For Operation:

-10-40 °C without derating) || 40-60 °C with current derating 2.2 % per °C)

Supply Frequency:

50...60 Hz - 10...10 %

Discrete Input Voltage:

24 V <= 30 V

Phase:

3 phase

Product Or Component Type:

soft starter

[Us] Rated Supply Voltage:

230...600 V - 15...10 %

Ptc Probe Input:

750 Ohm

Type Of Cooling:

forced convection

Discrete Input Type:

LI1, LI2, LI3) logic, 5 mA 4.3 kOhm

China Rohs Regulation:

X

Power Dissipation In W:

117 W for standard applications

Communication Port Protocol:

Modbus

Range Of Product:

Altistart 22

Noise Level:

56 dB

Shock Resistance:

15 gn 11 ms EN/IEC 60068-2-27

Output Current:

0.4...1 Icl adjustable

Utilisation Category:

AC-53A

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Supply Voltage Limits:

195-660 V

Operating Altitude:

<= 3280.84 ft (1000 m) without derating || > 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m

Motor Power Kw:

110 kW 400 V || 110 kW 440 V || 55 kW 230 V || 132 kW 500 V

Type Of Start:

start with torque control (current limited to 3.5 In)

Factory Setting Current:

180 A

Transmission Rate:

4800, 9600 or 19200 bps

Control Circuit Consumption:

20 W

Physical Interface:

RS485 multidrop

Icl Starter Rating:

210 A connection in the motor supply line for standard applications

Relative Humidity:

0-95 % without condensation or dripping water EN/IEC 60068-2-3

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Ip Degree Of Protection:

IP00

Discrete Output Type:

relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O || relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O

Vibration Resistance:

1 gn 13-200 Hz)EN/IEC 60068-2-6 || 1.5 mm 2-13 Hz)EN/IEC 60068-2-6

Rohs Exemption Information:

Yes

Assembly Style:

with heat sink

Warranty:

18 months

Net Weight:

33 kg

Minimum Switching Current:

100 mA 12 V DC relay outputs)

Component Name:

ATS22

Discrete Input Logic:

positive logic LI1, LI2, LI3 < 5 V <= 2 mA > 11 V, >= 5 mA

Marking:

CE

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Device Connection:

in the motor supply line

Installed Device:

31

Product Specific Application:

pumps and fans

Depth:

299 mm

Power Range:

55-100 kW 200-240 V 3 phase || 110-220 kW 380-440 V 3 phase || 110-220 kW 480-500 V 3 phase

Network Frequency:

45...66 Hz

Communication Data Link:

serial

Standards:

EN/IEC 60947-4-2

Motor Starter Type:

soft starter

Electromagnetic Compatibility:

conducted and radiated emissions level A IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electr

Brochure:

View

Catalog:

View

Datasheet:

View