Schneider Electric

Schneider Electric ATS22C41S6U Electronic Soft Starter Control 110V Pow

(No reviews yet) Write a Review
SKU:
ATS22C41S6U
UPC:
3606480211225
Condition:
New
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Standards:
EN/IEC 60947-4-2
[Us] Rated Supply Voltage:
208...600 V - 15...10 %
China Rohs Regulation:
X
Warranty:
18 months
Minimum Switching Current:
100 mA 12 V DC relay outputs)
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Mercury Free:
Yes
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Rohs Exemption Information:
Yes
Ptc Probe Input:
750 Ohm
Ip Degree Of Protection:
IP00
Assembly Style:
with heat sink
Depth:
299 mm
Supply Voltage Limits:
177-660 V
Connector Type:
1 RJ45
Factory Setting Current:
361 A
Discrete Input Voltage:
110 V <= 121 V
Output Current:
0.4...1 Icl adjustable
Product Specific Application:
pumps and fans
Protection Type:
phase failure line || thermal protection motor || thermal protection starter
Product Destination:
asynchronous motors
Component Name:
ATS22
Operating Position:
vertical +/- 10 degree
Phase:
3 phase
Maximum Switching Current:
5 A 250 V AC resistive 1 relay outputs || 5 A 30 V DC resistive 1 relay outputs || 2 A 250 V AC inductive 0.4 20 ms relay outputs || 2 A 30 V DC inductive 7 ms relay outputs
Utilisation Category:
AC-53A
Relative Humidity:
0-95 % without condensation or dripping water EN/IEC 60068-2-3
Function Available:
internal bypass
Net Weight:
33 kg
Physical Interface:
RS485 multidrop
Installed Device:
31
Discrete Input Type:
LI1, LI2, LI3) logic, 5 mA 20 kOhm
Range Of Product:
Altistart 22
Pollution Degree:
level 2 IEC 60664-1
Discrete Input Number:
3
Shock Resistance:
15 gn 11 ms EN/IEC 60068-2-27
Device Connection:
in the motor supply line
Marking:
CE
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m
Vibration Resistance:
1 gn 13-200 Hz)EN/IEC 60068-2-6 || 1.5 mm 2-13 Hz)EN/IEC 60068-2-6
Type Of Start:
start with torque control (current limited to 3.5 In)
Discrete Output Type:
relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O || relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Network Frequency:
45...66 Hz
Icl Starter Rating:
410 A connection in the motor supply line for standard applications
Product Certifications:
UL || CSA || CCC || GOST || C-tick
Power Dissipation In W:
177 W for standard applications
Electromagnetic Compatibility:
conducted and radiated emissions level A IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electr
Height:
425 mm
Communication Port Protocol:
Modbus
Discrete Output Number:
2
Type Of Cooling:
forced convection
Noise Level:
56 dB
Control Circuit Consumption:
20 W
Discrete Input Logic:
positive logic LI1, LI2, LI3 < 20 V <= 15 mA > 79 V, <= 2 mA
Product Or Component Type:
soft starter
Maximum Horse Power Rating:
125 hp 208 V || 150 hp 230 V || 300 hp 460 V || 350 hp 575 V
Transmission Rate:
4800, 9600 or 19200 bps
[Uc] Control Circuit Voltage:
110 V - 15...10 % 50/60 Hz
Ambient Air Temperature For Operation:
-10-40 °C without derating) || 40-60 °C with current derating 2.2 % per °C)
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Supply Frequency:
50...60 Hz - 10...10 %
Width:
206 mm
Ambient Air Temperature For Storage:
-25-70 °C
Brochure:
View
Catalog:
View
Datasheet:
View
$5,359.50

Description

This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line connection. It has a rating of 410A, a rated power from 125HP to 350HP and a rated voltage from 230V to 575V AC. It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
View AllClose