Schneider Electric

Schneider Electric ATS22D17S6 Electronic Soft Starter Control 220V Pow

(No reviews yet) Write a Review

Write a Review

Schneider Electric

Schneider Electric ATS22D17S6 Electronic Soft Starter Control 220V Pow

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

ATS22D17S6

UPC:

3606480167270

MPN:

Condition:

New

[Us] Rated Supply Voltage:

230...600 V - 15...10 %

Utilisation Category:

AC-53A

Power Dissipation In W:

39 W for standard applications

Product Certifications:

C-tick || CSA || CCC || GOST || UL

Operating Altitude:

<= 3280.84 ft (1000 m) without derating || > 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m

Phase:

3 phase

Noise Level:

45 dB

Type Of Start:

start with torque control (current limited to 3.5 In)

Component Name:

ATS22

Product Destination:

asynchronous motors

Discrete Output Type:

relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O || relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O

Ambient Air Temperature For Storage:

-25-70 °C

Control Circuit Consumption:

20 W

Motor Starter Type:

soft starter

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Discrete Input Number:

3

China Rohs Regulation:

X

Range Of Product:

Altistart 22

Vibration Resistance:

1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm 2-13 Hz)IEC 60068-2-6

Protection Type:

phase failure line || thermal protection motor || thermal protection starter

Output Current:

0.4...1 Icl adjustable

Ambient Air Temperature For Operation:

-10-40 °C without derating) || 40-60 °C with current derating 2.2 % per °C)

Mercury Free:

Yes

Discrete Output Number:

2

Minimum Switching Current:

100 mA 12 V DC relay outputs)

Shock Resistance:

15 gn 11 ms IEC 60068-2-27

Operating Position:

vertical +/- 10 degree

Device Connection:

in the motor supply line

Warranty:

18 months

Supply Frequency:

50...60 Hz - 10...10 %

Supply Voltage Limits:

195-660 V

Function Available:

internal bypass

Height:

265 mm

Rohs Exemption Information:

Yes

Factory Setting Current:

14 A

Motor Power Kw:

4 kW 230 V || 7.5 kW 400 V || 7.5 kW 440 V || 9 kW 500 V

Pollution Degree:

level 2 IEC 60664-1

Network Frequency:

45...66 Hz

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Transmission Rate:

4800, 9600 or 19200 bps

Width:

130 mm

Ptc Probe Input:

750 Ohm

Power Range:

4-6 kW 200-240 V 3 phase || 7-11 kW 380-440 V 3 phase || 7-11 kW 480-500 V 3 phase

Ip Degree Of Protection:

IP20

Physical Interface:

RS485 multidrop

Marking:

CE

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Electromagnetic Compatibility:

conducted and radiated emissions level A IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electr

Maximum Switching Current:

5 A 250 V AC resistive 1 relay outputs || 5 A 30 V DC resistive 1 relay outputs || 2 A 250 V AC inductive 0.4 20 ms relay outputs || 2 A 30 V DC inductive 7 ms relay outputs

Communication Data Link:

serial

Icl Starter Rating:

17 A connection in the motor supply line for standard applications

Communication Port Protocol:

Modbus

Discrete Input Voltage:

24 V <= 30 V

Assembly Style:

with heat sink

[Uc] Control Circuit Voltage:

230 V - 15...10 % 50/60 Hz

Depth:

169 mm

Installed Device:

31

Type Of Cooling:

forced convection

Product Or Component Type:

soft starter

Connector Type:

1 RJ45

Standards:

IEC 60947-4-2

Net Weight:

7 kg

Product Specific Application:

pumps and fans

Discrete Input Type:

LI1, LI2, LI3) logic, 5 mA 4.3 kOhm

Discrete Input Logic:

positive logic LI1, LI2, LI3 < 5 V <= 2 mA > 11 V, >= 5 mA

Relative Humidity:

0-95 % without condensation or dripping water IEC 60068-2-3

Brochure:

View

Catalog:

View

Datasheet:

View