Schneider Electric

Schneider Electric ATV12H037M3 Atv12 0.37Kw 240V 3Ph Heat Sink Tb

(No reviews yet) Write a Review
SKU:
ATV12H037M3
UPC:
3606480071157
Condition:
New
Pollution Degree:
2
Quantity Per Set:
set of 1
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...9842.52 ft (> 1000...3000 m) with current derating 1 % per 100 m
Analogue Output Number:
1
Mercury Free:
Yes
Maximum Transient Current:
3.6 A 60 s heavy duty) || 4.0 A 2 s heavy duty)
Maximum Horse Power Rating:
0.55 hp
Warranty:
18 months
Depth:
121.2 mm
Net Weight:
0.8 kg
Base Load Current At High Overload:
2.4 A
Acceleration And Deceleration Ramps:
S || linear from 0 to 999.9 s || U
Ip Degree Of Protection:
IP20
With Safety Function Safe Stop 1 (Ss1):
FALSE
Environmental Class (During Operation):
class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
Transmission Frame:
RTU
Motor Power Kw:
0.37 kW
Transmission Rate:
9.6 kbit/s || 19.2 kbit/s || 38.4 kbit/s
Communication Port Protocol:
Modbus
Network Frequency:
50-60 Hz
Discrete Output Number:
2
With Safety Function Safe Direction (Sdi):
FALSE
With Safety Function Safe Position (Sp):
FALSE
Linearity Error:
+/- 0.3 % of maximum value analogue input
Communication Service:
read holding registers (03) 29 words || write single register (06) 29 words || write multiple registers (16) 27 words || read/write multiple registers (23) 4/4 words || read device identification (43)
Emc Filter:
without EMC filter
Height:
143 mm
Vibration Resistance:
1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz) - drive unmounted on symmetrical DIN rail - IEC 60068-2-6
With Safety Function Safely Limited Speed (Sls):
FALSE
Standards:
UL 508C || UL 618000-5-1 || IEC 61800-5-1 || IEC 61800-3
With Safety Function Safely Limited Position (Slp):
FALSE
Assembly Style:
with heat sink
Nominal Output Current:
2.4 A
Width:
72 mm
With Safety Function Safe Brake Management (Sbc/Sbt):
FALSE
With Safety Function Safe Programmable Logic:
FALSE
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Time Constant:
20 ms +/- 1 ms for reference change
Tightening Torque:
0.8 N.m
Operating Position:
vertical +/- 10 degree
Transient Overtorque:
150-170 % of nominal motor torque depending on drive rating and type of motor
Mounting Mode:
cabinet mount
China Rohs Regulation:
X
Relative Humidity:
5-95 % without condensation IEC 60068-2-3 || 5-95 % without dripping water IEC 60068-2-3
Ambient Air Transport Temperature:
-25-70 °C
With Sft Fct Safe Stop 2 (Ss2):
FALSE
Brake Chopper Integrated:
FALSE
Speed Drive Output Frequency:
0.5-400 Hz
Motor Slip Compensation:
adjustable || preset in factory
Insulation:
electrical between power and control
Number Of Addresses:
1-247
Line Current:
3.6 A 100 V heavy duty) || 3.0 A 120 V heavy duty)
Braking To Standstill:
by DC injection
Relay Output Number:
1
Maximum Output Frequency:
4 kHz
Ambient Air Temperature For Storage:
-25-70 °C
Electromagnetic Emission:
radiated emissions environment 1 category C2 IEC 61800-3 2...16 kHz shielded motor cable || conducted emissions with additional EMC filter environment 1 category C2 IEC 61800-3 4...12 kHz shielded motor cable <20 m || conducted emissions with additio
Data Format:
8 bits, configurable odd, even or no parity
Speed Range:
45311
4 Quadrant Operation Possible:
FALSE
With Safety Function Safe Operating Stop (Sos):
FALSE
Maximum Output Voltage:
240 V
Frequency Resolution:
analog input converter A/D, 10 bits || display unit 0.1 Hz
Nominal Switching Frequency:
4 kHz
[Us] Rated Supply Voltage:
200...240 V - 15...10 %
Overvoltage Category:
class III
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Maximum Acceleration Under Vibrational Stress (During Operation):
10 m/s² at 13...200 Hz
Ambient Air Temperature For Operation:
-10-40 °C without derating || 40-60 °C with current derating 2.2 % per °C
Apparent Power:
1.2 kVA 240 V heavy duty)
Protection Type:
line supply overvoltage || line supply undervoltage || overcurrent between output phases and earth || overheating protection || short-circuit between motor phases || against input phase loss in three-phase || thermal motor protection via the drive by
Marking:
CE
Maximum Acceleration Under Shock Impact (During Operation):
150 m/s² at 11 ms
Range Of Product:
Altivar 12
Relative Symmetric Network Frequency Tolerance:
0.05
Physical Interface:
2-wire RS 485
Switching Frequency:
2...16 kHz adjustable || 4...16 kHz with derating factor
Supply Frequency:
50/60 Hz +/- 5 %
Sampling Duration:
20 ms +/- 1 ms logic input || 10 ms analogue input
Prospective Line Isc:
5 kA
Product Or Component Type:
variable speed drive
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...13 Hz
With Safety Function Safe Torque Off (Sto):
FALSE
Method Of Access:
server Modbus serial
Rohs Exemption Information:
Yes
Asynchronous Motor Control Profile:
quadratic voltage/frequency ratio || voltage/frequency ratio (V/f) || sensorless flux vector control
Power Dissipation In W:
natural 24.0 W
Continuous Output Current:
2.4 A 4 kHz
Regulation Loop:
adjustable PID regulator
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Type Of Polarization:
no impedance
Analogue Input Number:
1
Electromagnetic Compatibility:
electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || electrostatic discharge immunity test level 3 IEC 61000-4-2 || immunity to conducted disturbances level 3 IEC 61000-4-6 || radiated radio-frequency electromagnetic field immunity
Noise Level:
0 dB
Product Specific Application:
simple machine
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
With Safety Function Safe Speed Monitor (Ssm):
FALSE
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Connector Type:
1 RJ45
Discrete Input Number:
4
Product Certifications:
NOM || CSA || C-tick || UL || GOST || RCM || KC
Brochure:
View
Catalog:
View
Datasheet:
View
$264.69

Description

Altivar Machine ATV12 is an offer of variable speed drives for commercial equipment and simple machines. It works at a rated power up to 0.37kW / 0.55hp and a rated voltage from 200V to 240V AC. It is designed with heatsink for normal environments and fan-cooled enclosure. It has advanced PID and catch on the fly functions, basic cabling, and easy motor control setting. Based on the needs, it can be delivered without heatsink, with embedded EMC filter, or as standard version. The Altivar 12 drive integrates as standard the Modbus communication protocol. This Altivar Machine ATV12 is designed for simple applications, in industry, commercial machines and HVAC machines such as conveyors, pumps, extractors, access barriers and treadmills. It conforms to IEC, UL and other international standards. SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime. It features an optimized application of power and torque for ventilation and pumping applications, this allows up to 30% energy savings.
View AllClose